User's Manual

Rockwell Automation Publication 56RF-UM001D-EN-P - November 2021 51
Chapter 6 Add Your RFID Interface Block to an RSLogix5000 Program
Internet Protocol Tab For the purposes of this user manual, you are expected to use a Private
Address, that is, an address of 192.168.1.xxx. This window is automatically
populated with the data.
Port Configuration Tab
Changes to the fields on the Port Configuration tab are not required for the
Quick Start process. These fields only become active when the controller is
online.
The number of ports that are shown in this window varies depending on the
block used. There are either one or two ports.
The following window shows two ports. Port 1 is active, while Port 2 is inactive.