Operation Manual


ENGLISH
Simple
Version
Remote
Control
Playback
(Advanced)
Connections
Playback
(Basic)
Multi-
zone
GUISettings
Getting Started
Troubleshooting
Other
Information
Spec. Index
Part
Names
1
Turn on the TV and subwoofer
power.
Change the TV input to the input of this unit.
Power on
2
Press ON to turn on power to the
unit.
The power indicator lights blue.
The “FIRST SETUP” screen is displayed on
the TV.
•
•
ON ··········· Power on
FIRST SETUP 1/2
RETURN
GUI Language
Select the language displayed on the GUI screen
Enter Cancel
English
Deutsch
Nederlands
Svenska
Français
Italiano
Español
*/
)%.*
Use only HDMI (High Definition Multimedia Interface)
cable that bears the HDMI logo (genuine HDMI product).
Using cable without the HDMI logo (non-genuine HDMI
product) may result in abnormal playback.
When outputting deep color or 1080p, etc., we
recommend you use High Speed HDMI cable for
enhanced high-quality playback.
To household power outlet
(AC 230 V, 50 Hz)
Power cord
(included)
TV
HDMI cable
(sold separately)
NOTE
Do not plug in the power cord until all connections have been completed.
Do not bundle power cords together with connection cables. Doing so can result in humming or noise.
•
•
Connect
3
Select your desired language from the
on-screen list and press ENTER.
The “FIRST SETUP 2/2” screen is displayed.
ui ········· Select
ENTER ····· Confirm
If “Cancel” is Selected
“Cancel setup?” is displayed on the GUI screen.
If “Yes” is selected, “FIRST SETUP” closes.
The GUI Language returns to the factory setting
(English).
Continuing with speaker setup
See “Set Up Speakers (Audyssey™ Auto
Setup)” (vpage 6).
The title of the GUI screen will change from
“FIRST SETUP” to “AUDYSSEY AUTO SETUP”
at this point, but the operation method is the
same.
Setting the GUI Language again
Set the language using “Manual Setup” – “GUI
Language” (vpage 59) on the GUI menu.
“FIRST SETUP” is a guide for items required for
initial setup after the power is first turned on.
This screen is displayed when the power is first
turned on.
NOTE
The “FIRST SETUP” screen will not appear if
headphones are connected.
n
•
•
Turn on Power
1 2 4 53
33