Operation Manual


ENGLISH
Remote
Control
Playback
(Advanced)
Connections
Simple
Version
Playback
(Basic)
Multi-
zone
GUISettings
Getting Started
Troubleshooting
Other
Information
Spec. Index
Part
Names
Display Setup
Default settings are underlined.
Set display-related items.
Setting items Setting details
Still Mode
Set image quality during
pause.
Automatic : Display automatically using “Field” or “Frame” per the still
image information.
Field : Set when there is a blurred image when “Automatic” image display
is set.
Frame : Set to display non moving images in high resolution.
Slide Show Time
Sets the display time of
JPEG files.
3 – 5 – 100sec : This sets the display time per frame of a JPEG file during
slideshow playback.
Captions
This setting output a
subtitles signal to a closed
caption decoder (sold
separately).
On : Output the closed caption (subtitle) signal.
Off : Do not output the closed caption (subtitle) signal.
Other Setup
Default settings are underlined.
Set other items.
Setting items Setting details
Disc Layer
Sets the layer to play back in
a hybrid disc.
BD : Plays back the Blu-ray Disc layer.
DVD : Plays back the DVD layer.
Information
Displays the license for
the IPA font used by this
product.
GFont LicenseH
Japanese (Original) : Displays in Japanese.
The font used in this product’s GUI menu screen conforms to IPA font
specifications. See the following URL for the IPA font license agreement.
http://ipafont.ipa.go.jp/enduser_license.html
BD Data Utility
Erases data on SD memory
card, and initializes cards.
GBD Data EraseH : Erases both internal memory and SD memory card
storage.
No
Yes
GInitialize SD CardH : Initialize the SD memory card to be used for the
Bonus View and BD-LIVE function.
No
Yes
•
•
•
•
Setting items Setting details
BD Data Utility
(Continued)
NOTE
Insert or remove a SD memory card while the power is in standby.
If you insert a SD memory card while the power is ON, the SD memory
card may not be read.
The SD memory card used for the Bonus View function must have a
capacity of 1 GB or greater. Also the SD memory card must be initialized
on this unit.
This operation will delete all the data. Do not perform this operation
when an SD memory card containing MP3 or JPEG data is inserted.
•
•
•
Firmware Update
Update the firmware of the
unit via the Internet.
NOTE
“Firmware Update” cannot
be selected when there is a
disc in the disc tray.
Check for Update : Check if the latest firmware exists. You can also check
approximately how long it will take to complete an update.
Start : Starts firmware update.
When updating starts, the power indicator lights red and the GUI screen
is shut down.
During update, a rough remaining time is indicated on the display.
When updating is complete the power indicator lights green and normal
status is resumed.
Cautions on “Firmware Update”
In order to use this functions, you must have the correct system
requirements and settings for a broadband Internet connection
(vpage 16).
Do not turn off the power until updating is completed.
Information regarding the “Firmware Update” function will be
announced on the DENON web site each time related plans are
defined.
Even with a broadband connection to the Internet, approximately 1
hour is required for the updating procedure to be completed.
Once updating starts, normal operations on this unit cannot be
performed until updating is completed. In addition, the unit’s GUI menu
settings may be initialized.
In the event of an update error during update or upgrade, turn the
power of this unit off and then on again. “Update retry” appears on the
display and update restarts from the point at which update failed.
If the error continues despite this, check the network environment.
•
•
•
•
•
•
Remote control operation
buttons
Display the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Confirm the setting Return to previous menu