Operation Manual


ENGLISH
Remote
Control
Playback
(Advanced)
Connections
Simple
Version
Multi-
zone
GUISettings
Getting Started
Troubleshooting
Other
Information
Spec. Index
Part
Names
Playback
(Basic)
Playback
(Basic)
Switching the Angle
During playback of a Blu-ray Disc or DVD-Video recorded with several
camera angles, you can change the angle.
1
During playback, press ANGLE/
RT.
The angle number currently being played
is displayed.
Rear
Angle
1/3
2
Use ui to select angle.
Angle
2/3
3
Press ANGLE/RT.
The setup screen disappears.
NOTE
Angle changing may be restricted, depending on the disc.
Basic Operation
Depending on the disc, audio switching may be restricted to operation
of the disc menu. In this case, switch the audio on the disc menu.
Be sure to set “BD Audio Mode” to “Mix Audio Output” (vpage
60) for playing back secondary audio.
Depending on the Blu-ray Disc, even if picture-in-picture playback is
set to “Off”, Secondary Audio only may be output.
Audio Switching (Media Other than Blu-ray Disc)
1
During playback, press AUDIO/RDS.
The audio number currently being played is displayed.
Audio
: Dolby Digital1/5 3/2.1 English
Rear
2
Use ui to select audio.
Audio
: Dolby Digital2/5 3/2.1 Japanese
3
Press AUDIO/RDS.
The setup screen disappears.
For DivX
®
files, “---” is displayed when the audio is not “MP3” or
“Dolby Digital”.
NOTE
Audio switching may vary depending on the playback media used.
With DTS-CD (5.1 music disc), you cannot switch audio modes.
•
•
•
•
•
Switching Audio
With discs and files that have multiple audio track recording, you can
change the audio during playback.
With Blu-ray Disc, you can set sub-track audio such as interactive
audio and audio commentary, etc., with “Secondary”.
Switching a Blu-ray Disc’s Primary Audio/
Secondary Audio
1
During playback of a Primary Audio/Secondary
Audio title, press AUDIO/RDS.
The audio number currently being played is displayed.
Audio
Primary
1/5 : Dolby Digital 3/2.1 English
Secondary
–/1 : Off
Rear
2
Press ui, select “Primary”
or “Secondary”, and then press
ENTER.
If multiple audio items are recorded, “the
current audio number/number of recorded
audio items” is displayed.
When “BD Audio Mode” is set to “HD Audio
Output” (vpage 60), “Secondary” audio is
not output.
•
•
3
Select your desired audio language
with ui.
Audio
Primary
2/5 : Dolby Digital 3/2.1 Japanese
Secondary
–/1 : Off
4
Press AUDIO/RDS.
The setup screen disappears.
The icons show the category of
content applicable to each operation.
Video Audio Photo
For details of the media corresponding to each icon, see “Playable Media”
(vpage 19).