Operation Manual

32
Appendix
TipsSettingsConnections
Contents
Front panel Display Rear panel IndexRemote
Playback
Playing tracks in a specific order
(Program playback)
Up to 20 tracks can be programmed.
1
In the stop mode, press PROGRAM.
“PROG” is displayed on the display.
2
Use 0 – 9 and +10 to select the tracks you want to
program.
GExampleH
To program tracks 3 and 12 to be played in that order, press 3, +10,
and 2 one after the other.
3
Press 1/3.
Playback starts in the programmed order.
%
• When REPEAT is pressed during program playback, the tracks are played
repeatedly in the programmed order.
NOTE
• The program is cleared when the disc tray is opened or the power is turned o.
2 Checking the order of the programmed tracks
In the stop mode, press 9.
The track numbers are displayed in the programmed order each time
the button is pressed.
2 To clear the last track programmed
In the stop mode, press CLEAR.
The last track programmed is cleared each time the button is pressed.
2 Clearing the all programmed track
In the stop mode, press PROGRAM.