Operation Manual

0
The wireless LAN (Wi-Fi) settings of this unit can also be configured from a PC or
tablet that supports wireless LAN connection.
0
When using a device that has a firmware version of iOS 7 or later, “When
connecting using Wi-Fi” (v p. 254) in “Use iOS Device”.
1. Press and hold the DIMMER and STATUS buttons on the main unit for at least 3
seconds when the power of the unit is on.
2. Connect the wireless LAN of the PC or tablet used to “Denon AVR-X6200W”
when the message “Connect your Wi-Fi device to Wi-Fi network called “Denon
AVR-X6200W”” appears in the display.
3. Start up the browser and enter “192.168.1.16” in the URL.
4. Use the browser to enter the settings, select “Connect” and then exit the
settings.
Settings
Configure the proxy settings and IP address.
0
If you are using a broadband router (DHCP function), the information
required for network connection such as the IP address will be
automatically configured since the DHCP function is set to “On” in the
default settings of this unit.
0
Set up the IP Address, Subnet Mask, Default Gateway and DNS server
information only when assigning a fixed IP address or when connecting
to a network without DHCP function.
0
Configure the proxy settings when using a proxy server to connect to
the Internet.
.
DHCP
-IP Address
-Subnet Mask
Proxy
Save
Cancel
-Address
-Port
-Default Gateway
-Primary DNS
-Secondary DNS
Configures the network settings manually
Off
000.000.000.000
On(Address)
000.000.000.000
00000
Network/Settings
192.168.001.002
255.255.255.000
192.168.001.001
192.168.001.001
Contents
Connections Playback Settings Tips Appendix
256
Front panel Display Rear panel Remote Index