Operation Manual

Manual Setup

Perform when setting the speakers manually or when changing settings

made in Audyssey

Setup.

If you change the speaker settings after performing Audyssey

Setup,

you will no longer be able to select Audyssey MultEQ

XT32, Audyssey

Dynamic EQ

or Audyssey Dynamic Volume

. (v p. 197)

“Manual Setup” can be used without changing the settings. Please set if

necessary.

Amp Assign

Select the power amplifier usage method to match your speaker system.

Assign Mode

Select how to use the power amp.

You need to configure the detailed settings for the speaker

configuration in accordance with the selected mode. Select Assign

Mode configure the corresponding detailed settings.

11.1ch:

Setting to use the 9-channel power

amplifier in this unit and an external

power amplifier connected to PRE OUT

to play back up to 11.1-channels.

You can connect speakers for up to 13.1-

channels for MAIN ZONE.

Speakers to output audio are automatically

switched for playing back up to 11.1-

channels in accordance with the input

signal and sound mode.

Contents Connections Playback Settings Tips Appendix

232

Front panel Display Rear panel Remote Index