Graphical User Interface English Use this manual in combination with the operating guide displayed on the GUI screen. Menu Map (vpage 21) Examples of GUI Menu Screen Displays (vpage 22) Remote Control Unit Operations (vpage 57) Français Utilisez ce manuel en même temps que le guide d’utilisation affiché sur l’écran GUI (Interface graphique).
ENGLISH FRANCAIS n SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
FRANCAIS ENGLISH FCC INFORMATION (For US customers) n NOTE ON USE / OBSERVATIONS RELATIVES A L’UTILISATION 1. PRODUCT This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation. 2.
ENGLISH n Contents Getting Started Flow of operations through playback··········································2 Accessories···················································································2 Cautions on Handling····································································3 Cautions on Installation································································3 About the Remote Control Unit···················································3 Inserting the Batteries·················
ENGLISH Flow of operations through playback Perform the operations leading to playback on the AVR-2310CI in the order shown below. Connections Installing/Setting the Speakers (vpage 11) Thank you for purchasing this DENON product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference.
ENGLISH Getting Started Cautions on Handling About the Remote Control Unit Connections • Before turning the power switch on Check once again that all connections are correct and that there are no problems with the connection cables. In addition to the AVR-2310CI, the included remote control unit (RC-1117, 1119) can also be used to operate the equipment listed below. • Power is supplied to some of the circuitry even when the unit is set to the standby mode.
ENGLISH Getting Started Part Names and Functions Front Panel W6 W5 W4 W3 Button that function in the same way as Main remote control buttons W2 W1 o i For buttons not explained here, see the page indicated in parentheses ( ).
ENGLISH Getting Started Part Names and Functions Q7 Tuner reception mode indicators Display Q7 Q6 Q4 Q3 Q2Q1 Q5 Q0 o i u Connections Settings Playback q w Multi-Zone q Input audio signal indicators w Input signal channel indicators Remote Control These light when digital signals are input. When playing HD Audio sources, the“ ” indicator lights when an extension channel (a channel other than the front, center, surround, surround back or LFE channel) is input.
ENGLISH Rear Panel Q6 Q5 Q3 Q2 Q1 Q4 Q0 o i Connections Q8 Q7 Getting Started Part Names and Functions Settings Playback Multi-Zone Remote Control Information e r t i AC OUTLETS··············································· (19) o AC inlet (AC IN)··········································· (19) Q0 Speaker terminals······································ (12) Q1 FM/AM antenna terminals························ (18) Q2 EXT.
ENGLISH Getting Started Part Names and Functions Remote Control Unit Main Remote Control Unit (RC-1117) Connections Front Rear q w Settings e Playback t Q6 r W0 Multi-Zone t Remote Control W1 W2 W3 W4 y Q1 W5 Q7 Information Q2 u Q3 W7 Q8 i Troubleshooting o t W6 Q4 Q5 Q0 Specifications Q9 W8 q w e r t y u i o Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 Q9 W0 W1 W2 W3 W4 W5 Remote control signal transmitter Indicator······················································ (57) Power buttons···
ENGLISH Sub Remote Control Unit (RC-1119) w Remote control signal transmitter ZONE2 power buttons······························· (56) ZONE2 source select buttons···················· (56) ZONE2 QUICK SELECT buttons················ (55) ZONE2 Tuner operation buttons··············· (60) ZONE2 iPod operation buttons················· (60) MAIN ZONE source call button················· (60) ZONE2 muting button······························· (60) ZONE2 volume control buttons·········· (56, 60) Connections Settin
ENGLISH Getting Started Connections n Connection Flow Connections Installing/Setting the Speakers (vpage 11) Settings Connecting the Speakers (vpage 12) Important Information Connections for all compatible audio and video signal formats are described in this owner’s manual. Please select the types of connections suited for the equipment you are connecting. After connections are completed, certain settings must be made on the receiver.
ENGLISH Set as Necessary Converting Input video signals for Output (Video Conversion Function) Connections Resolutions of HDMI-compatible TVs can be checked at “HDMI Information” (vpage 53).
ENGLISH n When 7.1ch (Surround Back Speaker) Connected Front speakers Settings a Determine the Speaker Layout z 2 Playback Surround speakers Multi-Zone GAs seen from aboveH Remote Control Front speakers Center speaker Information Surround speaker Troubleshooting Surround back speakers NOTE It is not possible to use the front height speakers and surround back speakers simultaneously.
ENGLISH s Set the “Amp Assign” Mode According to the Speaker Layout The signals output from the AVR-2310CI’s SURR. BACK/AMP ASSIGN speaker terminals can be switched to signals of the surround mode being used (vpage 28 “Amp Assign”). SURR.
ENGLISH Getting Started Connecting the Speakers Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being connected to the AVR-2310CI, and be sure to interconnect the channels and polarities correctly. These connections make for higher quality playback sound with no interference between the signals of the bass and treble units. When the amplifier assignment mode is set to “Front A Bi-Amp” or “Front B Bi-Amp”, connect as shown below.
ENGLISH Connections The AVR-2310CI allows connection of inputs from up to 5 HDMI devices and output to 1 TV. n Connecting to a device equipped with a DVI-D terminal NOTE )%.* 065 )%.* 065 SAT/CABLE Tuner )%.* 065 Digital Video Recorder )%.* 065 n Settings related to HDMI connections For instructions on HDMI connections, see “Connecting Devices Equipped with HDMI terminals” on page 13.
ENGLISH Getting Started Connecting Devices not Equipped with HDMI terminals CD Player Control dock for iPod® Playback Components Connections Use a DENON control dock for iPod (ASD-1R, ASD-11R, ASD-3N or ASD-3W sold separately) to connect the iPod to the AVR-2310CI. For instructions on the control dock for iPod settings, refer to the control dock for iPod’s operating instructions. Blu-ray Disc player / DVD player Select the terminal to use and connect the device.
ENGLISH Record Player Recording Components Digital Video Recorder Video Cassette Recorder Select the terminal to use and connect the device. Select the terminal to use and connect the device. For instructions on HDMI connections, see “Connecting Devices Equipped with HDMI terminals” on page 13. For instructions on HDMI connections, see “Connecting Devices Equipped with HDMI terminals” on page 13. Video cassette recorder 7*%&0 L $0.
ENGLISH Getting Started Connecting Devices not Equipped with HDMI terminals SAT/CABLE Tuner Select the terminal to use and connect the device. Connections For instructions on HDMI connections, see “Connecting Devices Equipped with HDMI terminals” on page 13.
ENGLISH SIRIUS Connector Antenna terminals • The AVR-2310CI is a SIRIUS Satellite Radio Ready® receiver. You can receive SIRIUS® Satellite Radio by connecting to the SiriusConnect Home Tuner and subscribing to the SIRIUS service. • Plug the SIRIUS connector on the rear panel. • Position the Home Tuner antenna near a south-facing window to receive the best signal. For details, see “Listening to SIRIUS Satellite Radio Programs” (vpage 44, 45).
ENGLISH Getting Started Connecting Devices not Equipped with HDMI terminals External Controller n RS-232C connector Connections When you connect an external control device, you can control the AVR-2310CI with the external control device. Perform the operation below beforehand. Connecting the Power Cord n REMOTE CONTROL jacks Infrared retransmitter Infrared sensor Settings q Turn on the AVR-2310CI’s power. w Turn off the AVR-2310CI’s power from the external controller.
ENGLISH Selecting the Input Source Turning the Power On 1 . The power indicator lights red and the power is set to the standby mode. Press . The power indicator flashes green and the power turns on. Front The input source can also be selected using the source selection menu. when in standby mode, the power turns on. When on to “MAIN”. to “MAIN/TV” to “MAIN”. Press the SOURCE SELECT button (vpage 7). The desired input source can be selected directly. Front Press Rear .
ENGLISH With the AVR-2310CI, settings and operations for most functions can be performed by operating while looking at the menus displayed on the monitor screen. Settings you want to set, then press p or . ui to 3 Press select the item you want to set, then press p or . se uio p to select the item, 4 U then press to set. b To return to the previous item, press o or . b Select “Default Yes”, then press reset to the default setting. to ⇩ ui to 2 Press select the item . The menu is displayed.
ENGLISH Getting Started Examples of GUI Menu Screen Displays Typical examples are described below. GExample 1H Top Menu Display GExample 2H Display when changing settings GExample 3H Display when inputting characters Connections z1 INPUT INPUT MENU z1 Auto [ HDMI ] INPUT z2 [DIGITAL] [ COMP ] [ iPod ] z4 Adjust Setup z3 Coax1 None Opt1 1-RCA None None None None None SAT/CBL VCR DVR HDMI3 None HDMI4 Coax2 None Opt2 None None 2-RCA None Assign None V.
ENGLISH Getting Started Making the Optimum Settings for the Connected Speakers Automatically (Audyssey Auto Setup) The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically.
ENGLISH s Audyssey Auto Setup Preparations a Connect the included Setup Microphone NOTE around items indicate the settings made upon purchase. NOTE STEP1 Preparation (vpage 12 “Connecting the Speakers”) When using a subwoofer, make the following settings before starting the Audyssey Auto Setup procedure: Changing the amplifier assignment (Amp Assign) Set the TV’s input to the AVR-2310CI. n When using a subwoofer with a direct mode The signals output from the AVR-2310CI’s SURR.
ENGLISH Getting Started Making the Optimum Settings for the Connected Speakers Automatically (Audyssey Auto Setup) Set the channel to be measured (Channel Select) Connections he front speaker to be measured can be selected ahead of time T here. • Subwoofer, Surround Back Settings I f you set the channels you will not use beforehand, those channels will not be measured. Therefore, you can save an amount of time commensurate with that which would have been taken to measure those channels.
ENGLISH n Exiting the GUI Menu STEP5 Check AUTO The measurement result confirmation screen is displayed. AUTO Check Check processing ults.To SETUP MultEQ [5/6] res- proceed,press "Next" Spkr Config Check Distance Check Ch.Level Check Crossover Next Check Store ENTER Select item to Enter RETURN Cancel check • If the result differs from the actual connection status or an error message appears, use ui to GUI menu “Retry” and then press to repeat the measurement.
ENGLISH Getting Started Making the Optimum Settings for the Connected Speakers Automatically (Audyssey Auto Setup) Error Messages If the Audyssey Auto Setup procedure could not be completed due to speaker installation, the measuring environment, etc., an error message is displayed. If this happens, check the relevant items, be sure to take the necessary measures, then perform the Audyssey Auto Setup procedure over again.
ENGLISH Making the speaker settings (Speaker Setup) Default settings are underlined. Use this procedure to set the speakers manually or if you wish to change the settings made with the Audyssey Auto Setup procedure. n Items that can be set with the Manual Setup procedure Amp Assign Sets the signal output to the speaker connected to the SURR. BACK/AMP ASSIGN terminals. Normal : The surround back channel audio signals are output. ZONE2 : The ZONE2 audio signals are output.
ENGLISH Getting Started Making detailed settings (Manual Setup) Setting contents Setting items Speaker Config. Connections Surround : Set the presence and size of the Surround speakers. Select speaker configuration • Large : Use of a large speaker that can adequately play back low frequencies. and size. (bass reproduction capability) • Small : Use of a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the surround speakers are not connected.
ENGLISH Setting contents Setting items Channel Level Troubleshooting Specifications Remote control operation buttons NOTE • When set to “Custom”, does not operate. • The front speaker setting stored for the “Quick Select” function is given priority. Information This can be set when “Speaker Config.” – “Subwoofer” (vpage 28) is set to “Yes” or “No”. MULTI CH : The front speakers used in modes other than the direct, stereo and pure direct play modes are set in advance. • A : Front speaker A is used.
ENGLISH Getting Started Making detailed settings (Manual Setup) Setting items Making the HDMI settings (HDMI Setup) Default settings are underlined. Connections Make settings for HDMI video/audio output. Setting items Settings Playback Multi-Zone RGB Range Set the video range of RGB output from the HDMI terminal. Auto Lip Sync Automatic compensation for timing shift in audio and video output. HDMI Audio Out Select HDMI audio output device.
ENGLISH Making the audio settings (Audio Setup) Default settings are underlined. +15dB : This is the recommended level. +10dB / +5dB / 0dB : Select the level according to the player being used. Troubleshooting Specifications : Moves the cursor (Up/Down/Left/Right) NOTE • Set so that the “Audyssey Byp. L/R” and “Audyssey Flat” settings can be made when the Audyssey Auto Setup procedure is performed.
ENGLISH Getting Started Making detailed settings (Manual Setup) Making the ZONE2 settings (ZONE2 Setup) Making other settings (Option Setup) Default settings are underlined. Connections Make settings for audio playback in a ZONE2 system. “ZONE2 Setup” is displayed when ZONE2 is selected with “Amp Assign” (vpage 28). Setting items Settings Playback Multi-Zone Level Lch Adjust the left channel output level. Level Rch Adjust the right channel output level.
ENGLISH Setting items Setting contents Setting items The “Format” can also be set by the following procedure. However, the GUI screen is not displayed. Quick Select Name Rename Label : Change the display name of the selected “Quick Select” Change the Quick Select setting. 1. Use ui to select the name of the Quick Select setting you want name. to change, then press . 2. Use o p to set the cursor to the character you want to change. 3. Use ui to change the character, then press .
ENGLISH Getting Started Making detailed settings (Manual Setup) Setting items Setting contents Connections Settings Trigger Out n When Setting for Zone (MAIN ZONE / ZONE2) Select the condition for Trigger out is activated through linkage to the power of the zone set to activating Trigger Out for “ON”. the input source, surround n When Setting for Input Source mode, etc. Activate trigger out when the input source set to “ON” is selected.
ENGLISH Default [ INPUT VIDEO SETUP ASSIGN HDMI ] [DIGITAL] [ COMP ] [ iPod Input Mode INPUT INPUT Video Select Source HDMI1 HDMI2 Coax1 None 1-RCA None None None Video Convert i/p Scaler ON Analog TV None Opt1 None None H N H H C N O O N N 2 N N A N N Resolution(Analog) Resolution(HDMI) Auto Auto Progressive Aspect Auto Full S V D V A C V .
ENGLISH Getting Started Making the input settings (Input Setup) Setting items Changing the Input Sources Assigned to the Input Terminals (Input Assign) Default settings are underlined. Connections Setting items Setting contents Settings Input Assign (HDMI) TV SAT/CBL VCR DVR V.AUX input HDMI : The DVD HDP Assign input sources to input sources are assigned to the HDMI input terminals as shown below. connectors.
ENGLISH Making the video settings (Video) Default settings are underlined. NOTE Multi-Zone • This can also be set by pressing • To cancel, press . to select “Source”. This can be set when the input source is DVD VCR DVR V.AUX . HDP TV Remote Control SAT/CBL ON : The input video signal is converted. OFF : The input video signal is not converted.
ENGLISH Getting Started Making the input settings (Input Setup) Setting items Changing the Input Source’s Input Mode and Decoding mode (Input Mode) Default settings are underlined. Decode Mode Set the input decoding mode. Connections The selectable input modes depend on the input source and “Input Assign” setting (vpage 37 “Changing the input sources assigned to the input terminals”).
ENGLISH Correcting the Input Source’s Playback Level (Source Level) Setting the Preset Channels to be Skipped (Preset Skip) Default settings are underlined. Default settings are underlined. Setting contents Setting contents Preset Skip This can be set when the source is set to TUNER SIRIUS . Set the preset memories that A ~ G : Select the preset channel(s) you do not want to display. you do not want to display • ON : Display this number. when tuning. • Skip : Skip this number.
ENGLISH Getting Started Making the input settings (Input Setup) Setting Radio Reception Restrictions (Parental Lock) Default settings are underlined. Check the SIRIUS Radio Reception Sensitivity (Antenna Aiming) Default settings are underlined. Connections Setting items Lock Setting Set the channel reception limits. Setting contents Settings This can be set when the source is set to SIRIUS . radio 1. Press . 2. Using uio p, input the password (4 digits number) and press . 3.
ENGLISH n Operation Flow Playing Components (vpage 42) q Standard Playback (vpage 46) 2 r Stereo Playback (vpage 48) 5 Use Also refer to the operating instructions of the connected components when playing them. ● External devices can be controlled by remote control unit (vpage 57 “Operating the Connected Devices by Remote Control Unit”). ● 2 3 to “MAIN”. Turn on the AVR-2310CI’s power. (vpage 20 “Turning the Power On”) Press to select the input source assigned in step 1w above.
ENGLISH Getting Started Playing Components 4 Press and hold it down for a 2 seconds or more to select the display mode. Connections There are two modes for display the contents recorded on the iPod. Browse mode :Displayed on the TV screen.
ENGLISH to select “FM” or “AM”. Rear Listening to Preset Stations Tune in the desired broadcast station. q To tune in automatically (Auto Tuning) Press to light the “AUTO” indicator on the display, then use w To tune in manually (Manual Tuning) Press to turn off the display’s “AUTO” indicator, then use Tune in the broadcast station you want to preset. Front n Default settings to select the preset number (1 to 8). again to complete the setting. • To preset other stations, repeat steps 1 to 5.
ENGLISH Getting Started Playing Components Searching Categories Front • The channel switches continuously when The strength of both the SIRIUS and terrestrial signals can be checked at menu “Antenna Aiming” (vpage 41). is pressed and held. Connections Your favorite broadcast channels can be preset so that you can tune them in easily. Up to 56 channels can be preset.
ENGLISH Operations During Playback Selecting the Surround Mode Getting Started Playing Components Select a surround mode to enjoy surround playback with your favorite sound field effects. Turning Off the Sound Temporarily (Muting) Front . q Playing Sources According to the Sources’ Audio Signal Format/Number of Channels (Standard Playback) Operations The sound from the speakers and pre-out connectors is automatically cut. Press mode.
ENGLISH Getting Started Selecting the Surround Mode Displaying the currently playing surround mode n Surround playback of multichannel sources (Dolby Digital, DTS, etc.) Connections In the case of standard playback of multi channel sources, the AVR-2310CI recognizes the format of the multi-channel audio input signal and automatically operates the appropriate decoder for surround sound.
ENGLISH Selecting the Surround Mode r Stereo Playback source by pressing 1 Select theandinput play the source (vpage Front The sound being played in the surround mode can be adjusted to your liking. The items (parameters) that can be adjusted depend on the signal being input and the currently set surround mode. For details on the adjustable parameters, see “Surround Modes and Parameters” (vpage 62). NOTE Press Rear to select the “STEREO”.
ENGLISH Getting Started Adjusting the Sound and Picture Quality (Audio/Video Adjust) Setting items LFE Setting contents Setting items –10dB ~ 0dB Connections Adjust the low-frequency effects level (LFE). Settings Center Image or proper playback of the different program sources, we recommend F setting to the values below. • Dolby Digital sources : “0dB” • DTS movie sources : “0dB” • DTS music sources : “–10dB” 0.0 ~ 1.0 (0.
ENGLISH Setting items Making the MultEQ, Dynamic EQ and Dynamic Volume Settings (Audyssey Settings) Setting contents Front Height Default settings are underlined. Subwoofer ATT ON : The input from the subwoofer channel is attenuated. Attenuate subwoofer level OFF : The input from the subwoofer channel is not attenuated. Usually use in this mode. when using EXT. IN mode. Setting contents Bass –6dB ~ +6dB (0dB) Adjusts the low frequencies. Treble –6dB ~ +6dB (0dB) Adjusts the frequencies.
ENGLISH Getting Started Adjusting the Sound and Picture Quality (Audio/Video Adjust) Setting items Setting contents Setting items Dynamic EQ Connections ON : Use Dynamic EQ function. Audyssey Dynamic EQ solves OFF : Do not use Dynamic EQ function. the problem of deteriorating • W hen set to “ON”, “ ” is displayed.
ENGLISH Restoring Compressed Audio to Nearly Pre-compressed Conditions for Playback (RESTORER) Adjusting the Picture Quality (Picture Adjust) Default settings are underlined. Default settings are underlined. Mode 1 (RESTORER 64) Mode 2 (RESTORER 96) Mode 3 (RESTORER HQ) –6 ~ +6 (0) –6 ~ +6 (0) OFF / Low / Middle / High Remote Control OFF 0 ~ +12 Multi-Zone • The default setting for “iPod” is “Mode3”. All others are set to “OFF”. • When set to something other than “OFF”, “ ” is displayed.
ENGLISH Getting Started Checking the Status (Information) Connections Setting items Status Shows information current settings.
ENGLISH HDMI Control Function power off step n You can switch audio output devices with a TV volume adjustment operation linkage to TV input switching n When playing the player, the AVR-2310CI input function switches to the function of that player Switch the AVR-2310CI input to the HDMI input source and check if the picture from the player is ok. When you turn the TV’s power to standby, check that the power of the AVR-2310CI and player also goes on standby.
ENGLISH Getting Started Adjust the Volume of the Different Speakers Saving Frequently Used Settings (Quick Select Function) You can adjust the channel level either according to the playback sources or to suit your taste, as described below. Connections Adjust the volume of the different speakers 1 Press . CHANNEL Front • Three sets of settings can be saved. LEVEL L 0.0dB R 0.0dB Settings Subwoofer Surround 0.0dB R 0.0dB S.Back L 0.0dB Surround MAIN ZONE settings 0.0dB R S.
ENGLISH q ZONE2 playback by speaker output w ZONE2 playback by audio output (PRE OUT) (using an external amplifier)) The audio signals connected to the AVR-2310CI’s ZONE2 output terminals (ZONE2 OUT) are output to the ZONE2’s amplifier and played with that amplifier. Connection (ZONE2) With the Amp Assign function, Zone 2 audio signals are output from the AVR-2310CI's SURR BACK/AMP ASSIGN terminals. R AVR-2310CI L Set the remote control unit’s “device selector switches” as shown on right.
ENGLISH Getting Started Operating the Connected Devices by Remote Control Unit iPod Connections Main Remote Control Unit (RC-1117) Registering Preset Codes Settings DENON and other makes of components can be operated by setting the preset memory. Playback 1 Switch .
ENGLISH TV Blu-ray Disc / DVD Player Front (fast-reverse / fast-forward) Channelz SKIP + Switching the input 6 7 Front Channels CH + – MENU uio p ENTER SETUP RETURN Disc skip Manual search (fast-reverse / fast-forward) Auto search (cue) Calling out the menus Cursor operation Enter setting Setup Return Front Rear 0 ~ 9, +10 Default setting (Preset code) Special Remarks Calling out the top menus Channels HITACHI (008) q, w Rear HITACHI (014) 0 ~ 9, +10 Default setting (Preset code) Special Rem
ENGLISH Getting Started Main Remote Control Unit (RC-1117) Satellite receiver/Cable TV Connections Front Front DEVICE SELECT DEVICE SELECT Settings ON/SOURCE 1 3 2 Playback 6 7 Multi-Zone CH + – uio p ENTER MENU SETUP RETURN Remote Control Front CD Player (fast-reverse / fast-forward) Channelz Information Default setting (Preset code) Special Remarks 6 7 Cursor operation Enter setting Calling out the menus Setup Return Rear 0 ~ 9, +10 POWER OFF ON/SOURCE 1 2 SHIFT, 3 SKIP + Power on
ENGLISH z : This button can be operated when using a control dock for iPod ASD-3N/3W. Dolby Digital Plus is an improved Dolby Digital signal format that is compatible with up to 7.1-channels of discrete digital sound and also improves sound quality thanks to extra data bit rate performance. It is upwardly compatible with conventional Dolby Digital, so it offers greater flexibility in response to the source signal and the conditions of the playback equipment.
ENGLISH Getting Started Surround DTS Surround DTS Digital Surround Connections DTS Digital Surround is the standard digital surround format of DTS, Inc., compatible with a sampling frequency of 44.1 or 48 kHz and up to 5.1-channels of digital discrete surround sound.
ENGLISH Surround Modes and Parameters Signals and adjustability in the different modes Surround mode Parameter (default values are shown in parentheses) Surround Front Height Subwoofer Back L/R L/R LFE S D D D D D S (OFF) S (0dB) A A A A A A A S MULTI CH DIRECT S D D D A D A S (0dB) S (ON) S A A A A A A A STEREO S A A A A D S (OFF) S (0dB) A A A A A A A A S (Auto) EXT.
ENGLISH Getting Started Surround Signals and adjustability in the different modes Parameter (default values are shown in parentheses) Surround mode PRO LOGIC g/gx MUSIC mode only NEO:6 MUSIC mode only EXT.
ENGLISH Differences in Surround Mode Names Depending on the Input Signals Input signals Button PCM Linear ANALOG PCM (multi ch) Linear PCM (2ch) DTS-HD Master Audio DTS DTS-HD High Resolution Audio DTS ES DTS ES DSCRT MTRX (With Flag) (With Flag) DOLBY DTS (5.1ch) DTS 96/24 DOLBY DIGITAL DOLBY DOLBY DIGITAL TrueHD Plus DOLBY DIGITAL EX (With Flag) DOLBY DOLBY DIGITAL EX DIGITAL (With no (5.
ENGLISH Getting Started Surround Input signals Button PCM Surround mode Note Connections Linear ANALOG PCM (multi ch) DTS-HD DTS Linear PCM (2ch) DTS-HD Master Audio DTS-HD High Resolution Audio DTS ES DTS ES DSCRT MTRX (With Flag) (With Flag) DOLBY DTS (5.1ch) DTS 96/24 DOLBY DIGITAL DOLBY DOLBY DIGITAL TrueHD Plus DOLBY DIGITAL EX (With Flag) DOLBY DOLBY DIGITAL DIGITAL EX (With (5.
ENGLISH Video Convert VIDEO VIDEO VIDEO S (VIDEO) S-VIDEO S-VIDEO S-VIDEO S-VIDEO S (S-VIDEO) A COMPONENT COMPONENT A (S-VIDEO) z3 A (S-VIDEO) z3 A (S-VIDEO) z3 A (COMPONENT) z2 A z2 A A z2 A A (COMPONENT) z3 A S (VIDEO) A A (COMPONENT) z3 A (S-VIDEO) S (S-VIDEO) A (S-VIDEO) A (COMPONENT) z3 A (S-VIDEO) S (S-VIDEO) A (S-VIDEO) A (COMPONENT) z3 A (COMPONENT) z3 A (VIDEO) S (VIDEO) A (VIDEO) A (COMPONENT) z3 A (S-VIDEO) S (S-VIDEO) A (S-VIDEO) A (COMPONENT) z3 A (S-VIDEO) S (S-VIDEO) A (S
ENGLISH Getting Started Troubleshooting Connections Settings If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other components operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
ENGLISH 47, 48 Symptom No picture appears. 49 46 – 28 12 Picture cannot be recorded. Cause • The connections between the AVR-2310CI and monitor are faulty. • The monitor’s input setting is wrong. • PURE DIRECT mode is set. • The player is connected using the component input connectors, the monitor is connected using the video (yellow) output connectors. • Input source does not match recorder’s video connection connector (video). 55 – – 39 DVDs cannot be copied on a DVR.
ENGLISH Getting Started GSIRIUS Satellite RadioH GHDMIH Connections Settings Playback Multi-Zone Symptom HDMI audio signals are not output from speakers. Cause Countermeasure • The “Manual Setup” – “HDMI • Set to “Amp” Setup” – “HDMI Audio Out” setting is set to “TV”. No picture appears with HDMI connections. • The connections to the HDMI connectors are faulty. • HDMI input setting is improper. • The monitor is not compatible with copyright protection (HDCP).
ENGLISH [AM] 520 kHz ~ 1710 kHz 18 µV n General Power supply: Power consumption: Maximum external dimensions: Weight: AC 120 V, 60 Hz 6.0 A 0.3 W (Standby) 434 (W) x 171 (H) x 377 (D) mm (17-3/32” x 6-47/64” x 14-27/32”) 11.3 kg (24 lbs 14.6 oz) n Main Remote control unit (RC-1117) Batteries: Maximum external dimensions: Weight: R6/AA Type (two batteries) 52 (W) x 243 (H) x 21 (D) mm (2-3/64” x 9-9/16” x 53/64”) 184 g (Approx 6.
List of preset codes / Liste de codes préréglés Contec Contec/Cony Craig Crosley Crown CTX DEVICE SELECT : TV Television A B C 3M Addison Admiral Advent Adventura Aiko Akai Albatron Alleron America Action Ampro Amtron Anam Anam National AOC Apex Apex Digital Audiovox Aventura Axion Bang & Olufsen Barco Baur Belcor Bell & Howell Benq Blue Sky Bradford Brillian Brockwood Broksonic byd:sign Candle Carnivale Carver CCE Celebrity Celera Changhong Ching Tai Chun Yun Chung Hsin Citizen Clarion Coby 100 163
Telefunken TMK Toshiba U V W Y Z Totevision Trutech Tuntex TVS US Logic Vector Research Vidikron Vidtech Viewsonic Viking Viore Vizio Wards Westinghouse White Westinghouse Yamaha Yapshe Zenith 019 012 003, 004, 005, 006, 030, 051, 156, 177 153 091 158, 163 050, 141 090 137, 151 155 012, 030, 036 061, 076, 142 041 115 061, 093, 094, 095, 126, 144 010, 012, 030, 033, 036, 039, 137, 151, 155 061, 065, 140 T W RCA Sylvania F M P T G C D G H I L M O P R S Akai Apex Axion Coby Cytron DiamondVision Dis
I J L M N P R S T iBUYPOWER JVC Linksys Media Center PC Microsoft Mind Niveus Media Northgate Panasonic Philips Proscan RCA ReplayTV Samsung Sonic Blue Sony Stack Systemax Tagar Systems Tivo U V Z Toshiba Touch UltimateTV Viewsonic Voodoo ZT Group 035 063, 076 035 035 035 035 035 035 070 063, 065, 066, 067, 068, 072 077 063, 065, 072, 077 069 065, 067, 072 069 035, 064, 074, 078 035 035 035 063, 064, 065, 068, 073, 074, 078 035, 075 035 077 035 035 035 D E F G H Video Cassette Recorder A B C A
R Pioneer Primestar Proscan Proton RadioShack RCA S T U V Z Realistic Samsung Sharp Sony Star Choice STS Tivax Tivo Toshiba UltimateTV Uniden US Digital Viewsat Voom Zenith F G H J Jerrold L M B C D E ABC Adelphia Americast Antronix Archer AT&T Bell South Cable Vision Cabletenna Cableview Clearmaster ClearMax Colour Voice Comcast Comtronics Contec Coolmax COX Daeryung Director Dumont Eastern [009]z, 010, 012, 028, 040 007 047 014, 015 015 003 047 006 014 013 046 046 016 000, 005, 033 017 018 046
www.denon.com D&M Holdings Inc.