Specification Sheet
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
MultiChoice
®
Universal
Pressure Balance Tub and Shower
Page 2.C.4 DSP–T13H1 Rev. I
Refer to www.specselect.com for individual models. Note: Use this page front and back as a product submittal sheet.
Approvals:
• ASME A112.18.1/CSA B125.1
•
Indicates compliance to
ICC/ANSI A117.1
• Pressure Balance Valve ASSE 1016
•
Handshower back flow
protection provided by
two integral certified check valves in series, which
operate independently,
ASME A112.18.3
( Contact Delta Representative for State and/or
Local Approvals.)
FLOW RATE vs PRESSURE
2.5
3
3.5
2
1.5
1
.5
00
0
1
2
3
4
5
6
7
8
9
10 20 30 40 50 60 70 80
10
11
12
13
Shower Outlets
No. 2
Line Pressure (psig)
FLOW
(L/min.)
FLOW
(gpm)
No. 8
No. 3, 5 & 6
FLOW RATE vs PRESSURE
6.5
7
7.5
8
5.5
6
5
4
4.5
3.5
3 11.5
13
20 30 40 50 60 70 80
Line Pressure (psig)
FLOW
(L/min.)
FLOW
(gpm)
14.5
16
17.5
19
20.5
22
23.5
25
26.5
28
29.5
FRONT VIEW SIDE VIEW
R10000-UNWS Rough-In
with
T13H132 Trim
117 mm
(4.6")
910 mm
(36.0")
OPTIONAL
910 mm
(36.0")
OPTIONAL
TO FLOOR
178 mm
(7.0")
51 mm
(2.0")
METAL LEVER
HANDLE
STOPS
HOT COLD
INLETS
C
L
VALVE
BODY
70 mm
(2.75”)
152 mm
(6.0")
Tub Filler Flow Rates
Shower Outlet Flow Rates
®
P/B VALVE INLETS:
1/2" Universal inlets accept 1/2" copper,
1/2" Iron pipe, PEX or CPVC adaptors
1/2" Male thread inlets/outlets
NOTE FOR SHOWER #6: Not for use as an anti-ligtature device.
PAUSE WARNING – FOR SHOWER #5
Plumbing Codes require that showerheads and handshowers provide a small but continuous flow
of water (trickle) when in “PAUSE” mode. Because of this continuous flow, in certain circumstances
pressure variations in the water line and/or changes in the position of the shower temperature control
handle while in “PAUSE” mode could result in dramatic changes to the temperature of the water when
the shower head or hand shower is returned to the “ON” position.
ALWAYS point the shower head away from yourself when returning to the “ON” position and feel the
water with your hand before resuming your shower to ensure the water flow is not too hot or too cold.
DO NOT allow children or others who might not understand this warning to use the “PAUSE” function.
Note: Measurements may vary ± 6mm (0.25")
R10000-UNWS
DSP–T13H1 Rev. I