User guide

RMC100 and RMCWin User Manual

6-64

Resolver Overview

Resolver LED Indicators

Resolver Wiring

Resolver Scaling

Resolver Specifications

Rotational Mode

6.5.4 Resolver LED Indicators

The two LEDs above the Drive connector on the RMC’s Resolver interface card are axis status

LEDs. These LEDs will reflect the operational status of their corresponding axis according to the

following table.

LED Action

Axis Status

Continuous Red

No Transducer

Alternating Red/Green

The above error has not occurred,

and one or more of the below

errors have occurred and are

enabled in the Auto Stop:

Overdrive Error

Parameter Error

Position Overflow

Integrator Windup

Following Error

Continuous Green

Status good. None of the above

are true.