Install Instructions

ManualsBrandsDelta ManualsShower ComponentsDelta Roman Tub Filler Rough In Valve with PEX Cold Expansion Connection

R2707 DECK MOUNT ROMAN TUB

ROUGH-IN KIT

TUBERÍA MATRIZ R2707 PARA BAÑERAS

DE INSTALACIÓN EN ENCIMERAS

SOUPAPE DE ROBINET DE BAIGNOIRE

ROMAINE MONTÉE SUR PLAGE R2707

2/05/16 Rev. C

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

You may need / Usted puede necesitar / Articles dont vous pouvez avoir besoin:

Para instalación fácil de su llave

Delta usted necesitará:

• LEER TODAS las instrucciones

completamente antes de empezar.

• LEER TODOS los avisos, cuidados,

e información de mantenimiento.

For easy installation of your Delta

faucet you will need:

• To READ ALL the instructions completely

before beginning.

• To READ ALL warnings, care, and

maintenance information.

Pour installer votre robinet Delta

facilement, vous devez:

• LIRE TOUTES les instructions avant de

débuter.

• LIRE TOUS les avertissements ainsi que

toutes les instructions de nettoyage et

d’entretien.

80163

80162

www.deltafaucet.com

Plumber’s Tape

Cinta del fontanero

Ruban de plombier

R2707

Finished Deck (Standard)

Installation

Use these instructions on a fin-

ished deck installation up to 2 1/2"

(63.5 mm) thick.

R2707

Instalación en Borde Terminado

(Estándar)

Use estas instrucciones en una

instalación en bordes terminados de

un grosor hasta 2 1/2" (63.5 mm).

R2707

Installation standard dans une

plage finie

Suivez ces instructions pour installer

un robinet dans une plage finie

épaisse d’au plus 2 1/2 po (63.5 mm).

R2707

Rough Deck (Thick Tile) Installation

Use these instructions on a rough

deck (thick tile) installation up to

2 1/2" (63.5 mm) thick (excluding

plywood underlayment).

R2707

Instalación de la Tubería en Bordes

(losas gruesas)

Use estas direcciones para la

instalación de las tuberías en un

borde (losas gruesas) hasta 2 1/2"

(63.5 mm) de grosor.

R2707

Installation dans une plage

en carreaux

Suivez ces instructions pour installer

un robinet dans une plage en car-

reaux épaisse d’au plus 2 1/2 po

(63.5 mm) (épaisseur du panneau de

sous-finition en contreplaqué exclue).

80163

R2707

R2707-PX

R2707-MF

Summary of content (12 pages)

PAGE 1
R2707 DECK MOUNT ROMAN TUB ROUGH-IN KIT 80163 R2707 R2707-MF TUBERÍA MATRIZ R2707 PARA BAÑERAS DE INSTALACIÓN EN ENCIMERAS R2707-PX SOUPAPE DE ROBINET DE BAIGNOIRE ROMAINE MONTÉE SUR PLAGE R2707 Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici.
PAGE 2
1/2" Crimp Rings & 6 Feet of FlexPex (Type A) PEX Tubing R2707-PX Anillos de engarce de 1/2" y 6 pies de tubería FlexPex (Tipo A) Tubería PEX Tuyau en PEX (type A) FlexPex de 6 pieds et bagues de sertissage 1/2 po PEX Cutter Cortador de tubería PEX Cisaille pour tuyau en PEX Finished Deck (Standard) PEX Crimp Installation Use standard PEX installation instructions for finished deck installation up to 2 1/2" thick.
PAGE 3
R2707 Standard Installation Instalación Estándar A. Installation standard C. 4 5" min. (12.7 cm) 5 4 1 2 3" min. (7.6 cm) 3 1 * 8"- 16" (20.3-40.6 cm) 1- 1/2" (38 mm) B. D. 1 3 1 2 1 1 1 1 3 1 1 2 Finished Deck (Standard) Installation (NOTE: Intended for surfaces up to 2 1/2" (63.5 mm) thick.) C. Install end valves (1) and spout adapter (2) from below. NOTE: Hot side end valve is labeled (3). Replace washers (4) on end valves and spout adapter, rotate 90° to expose screws (5).
PAGE 4
R2707 Instalación Estándar Standard Installation Installation standard G. E. 1 1 5 4 2 5 3 2 F. E. Make sure end valves are properly aligned (1). Carefully bend corrugated outlet G. Turn on water supplies and check for leaks. You are now ready for the trim kit. tubes (2) and insert into tee (3). Connect tee to spout adapter (4). Connect inlet tubes (5) to water supplies. Be careful bending the copper tubes. Kinked tubes‑will void warranty. Please see the trim installation instructions. F.
PAGE 5
R2707 Thick Tile Installation Instalación en lozas gruesas A. Installation sur des carreaux C. 5" min. (12.7 cm) 3" min. (7.6 cm) 4 * 8"- 16" (20.3-40.6 cm) 2.5" (64 mm) Min. 2.5 po Min. 24" (610 mm) Min. 24 po Min. 2" (51 mm) B. 1 2 1 4 D. 4 1 3 1 2 3 5 6 Rough Deck (Thick Tile) Installation (NOTE: Intended for surfaces C. Carefully bend corrugated outlet tubes (1) and insert into tee (2). Connect tee to up to 2 1/2" (63.5 mm) thick excluding plywood underlayment.
PAGE 6
R2707 Thick Tile Installation Instalación en lozas gruesas E. Installation sur des carreaux G. 1 2 3 2 1 3 3 H. 1 1 F. 2 2 I. 1 1 1 2 1 2 1 1 E. Turn on water supplies and check for leaks. F. Finish surface up to cardboard spacers (1). Washer (2) indicates maximum finished deck thickness. G. Loosen screws (1) until washer (2) is free. Rotate washer 90° and remove. Cut cardboard tubes (3) flush to finished deck and‑discard. 2 1 H. Replace washers (1) on end valves and spout adapter.
PAGE 7
R2707-PX R2707-MF PEX Standard Installation Instalación Estándar de PEX A. PEX Installation standard C. 5" min. (12.7 cm) 1 4 3" min. (7.6 cm) 5 4 * 8"- 16" (20.3-40.6 cm) 5 2 1 3 1 1/2" (38 mm) B. 5 4 3 1 1 5 2 1 3 1 2 2 Finished Deck (Standard) Installation B. Loosen screws (1) until cardboard tube (2) is free. Rotate washer (3) 90° A. Drill holes in FINISHED DECK per diagram. *For lever handles use 10" - 16" centers. Please refer to trim spec sheet for min. distance. C.
PAGE 8
R2707-PX R2707-MF PEX Standard Installation Instalación Estándar de PEX D. E2. R2707-MF 1 1 PEX Installation standard 3 1 1 1 1 4 1 3 1 3 4 2 4 5 4 3 2 4 2 E1. R2707-PX F. 3 R2707-PX 2 R2707-MF 4 3 3 3 2 2 Note: For PEX, be sure to use proper fitting for crimping and the proper tool for cold expansion. E2. For R2707-MF PEX Cold Expansion: Make sure end valves are properly D. Tighten screws (1) with a regular slotted screwdriver.
PAGE 9
R2707-PX PEX Thick Tile Installation Instalación PEX en losas gruesas PEX Installation sur des carreaux R2707-MF C1. A. R2707-PX 2 3 3" min. (7.6 cm) 5" min. (12.7 cm) 4 * 3 8"- 16" (20.3-40.6 cm) 2 3 2 2" (51 mm) 2 B. C2. 4 R2707-MF 3 1 1 6 1 2 5 5 3 3 4 1 3 5 4 2 2 4 2 3 2 Rough Deck (Thick Tile) Installation (NOTE: Intended for surfaces up to 2 1/2” (63.5 mm) thick excluding plywood underlayment.
PAGE 10
R2707-PX PEX Thick Tile Installation Instalación PEX en losas gruesas PEX Installation sur des carreaux R2707-MF D. R2707-PX F. 1 2 3 2 1 3 R2707-MF 3 G. 1 1 E. 2 2 H. 1 1 1 2 1 1 2 1 2 1 D. Turn on water supplies and check for leaks at arrows. G. Replace washers (1) on end valves and spout adapter. Rotate 90° to E. Finish surface up to cardboard spacers (1). Washer (2) indicates maximum H. Tighten screws (1) with a regular slotted screwdriver. Tighten until expose screws (2).
PAGE 11
RP40509 R2707 (Solder / Suelde / Brasage) Spout Adapter Assembly Ensamble del Adaptador del Tubo de Salida Adaptateur du bec R2707 (Solder) (Suelde) (Brasage) RP40505 Top Washer Arandela superior Rondelle supérieure RP40510 End Valve Assembly Ensamble de la válvula final Soupape RP40616 Test Cap Tapa de prueba Bouchon d’essai RP40503 Jack Screw Gato de Tornillo Vis d’ajustement RP40504 Top Washer Arandela superior Rondelle supérieure RP40507 Bottom Washer Arandela Inferior Rondelle inférieure RP40
PAGE 12
Cleaning and Care Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.