User's Manual

Appendix B New Upload/Download Function
Notes:
1. The file name of PLC programs should be DVP-xxx.dvp (xxx must be a number between 000
to 999).
2. If the PLC program is a new file, select New.. and then touch Upload icon on the screen to
add it into the file directory.
3. The supporting version and series of DVP series PLCs are listed in the table below:
DVP Series
PLC
Support Password Examination
Limit Function
Support Verification Code Limit
Function
ES X X
ES2 V1.0 and later version V1.0 and later version
EX X X
EC X X
SS X X
SA V 1.7 and later version V 1.7 and later version
SX V 1.7 and later version V 1.7 and later version
SC V 1.5 and later version V 1.5 and later version
SV V 1.2 and later version V1.3 and later version
EH X X
EH2 V 1.1 and later version V1.3 and later version
EH2-L V1.0 and later version V1.0 and later version
4. HMI Transfer Mode is available for uploading and downloading DVP series PLC programs
(*.dvp) only. It is not provided for the upload and download of the subroutine, ladder
diagram, SFC chart, note of device name and row, non-volatile data, label structure, symbol
structure, etc. data.
Revision May, 2010 B-3