Installation Guide

deltafaucet.com
800.345.DELTA (3358)
©2011 Masco Corporation of Indiana
DL-1742 11/11
Step 1
Insert the EZ Anchor
mounting assembly
through the hole in
the countertop.
Step 5
Slide the spout
down over the
spout hub.
Step 6
Install the wand
and then connect
the water supplies.
Step 2
Tighten the screw to adjust
the first cleat (black wedge
that secures the assembly
beneath the deck) until it’s
flush with the bottom of
the deck. Repeat for the
second cleat.
Step 3
Place the spout hub
through the assembly,
aligning the cut-out
and handle. Ensure the
small tube is in front
of the supply lines.
Step 4
Slide the spout hub
install rod (EZ Bar),
through the two holes on
the spout hub and rotate
clockwise until tightened.
E Z A N C H O R
™
I N S TA L L AT I O N
DFT11025_EZanchorSellSht.indd 2 11/8/11 4:34 PM