Installation Sheet

ManualsBrandsDelta ManualsOtherExposed Hardwire-Operated Flush Valve in Chrome

Item #

1 061063A

2 061064A

3 061065A

061066A

061070A

Case Top & Screws for 3rd Generation E-FV

6 060334A

7 061071A

061072A

061024A

060340A *

11a

11b

061068A

060694A

060764A

060844A

060859A

060783A

060863A

060784A

060781A

060463A

060745A

060773A

060463A

w w w . s p e c s e l e c t . c o m

204320 Rev. A

PLEASE LEAVE this M&I Sheet with the owner,

maintenance plumber, etc. as items

relating to ongoing maintenance suggestions

and procedures are included.

* Package Quantities May Change. Check the parts section of the latest Delta Commercial Faucet Price List for current quantities.

** Each individual sensor module requires its own 24 VAC to 6 VDC hardwire converter.

NOTE: Refer to TECK Flushometer Repair Parts and Maintenance Manual for additional parts

and information.

Nut

Fib

e Washer

Rubber

asher

Slip Joint Nut Installation

Wrench for

Brass

Renewable

Seat

Filter Screen

Electronic Exposed

TECK

II Flush Valves (Gen 3)

DescriptionPart #

Replaceable Lens for 3rd Generation E-FV

Cover Screw for 3rd Generation E-FV

CP Metal Cover & Screws for 3rd Generation E-FV

Manual Override Kit for 3rd Generation E-FV

Battery Holder

Hold-down Adaptor (2/pkg) for 3rd Generation E-FV

Regulating Screw & O-Ring

Water Closet Board for 3rd Generation E-FV

10a

Cover Gasket (6/pkg)

060507A

Water Closet Poppet Pin Pack (3/pkg)

060508A

Urinal Poppet Pin Pack (3/pkg)

060779A

Diaphragm/Guide Assembly Complete

060182A

RCP Brass Renewable Seat with Gasket

060341A

Wrench for Brass Renewable Seat

060342A

Plug & O-Ring for Handle End

060506A

Standard Adjustable Tail CP

060735A

Union Nut CP

060692A

Retaining Ring

060082A *

Adjustable Tail O-Ring Package (20/pkg)

060504A

S/S Wall Flange & Cover Tube

061067A

Electronic Water Closet Repair Kit for 3rd Generation E-FV

Electronic Urinal Repair Kit for 3rd Generation E-FV

060697A

1” Copper Sweat Inlet Adaptor

3/4” Copper Sweat Inlet Adaptor

3/4” FIP Inlet Adaptor

060843A

Retrofit Check Stem Unit, Capnut & Button Complete

Seat Washer, Spring, Button & O-Ring Kit

Angle Stop with Union Nut & Tail Complete

060081A * Plug Button Package (12/pkg)

060785A

VB Sleeve Complete

060094A CP Male Threaded Coupling Ring

060782A

1-1/2” x 10” VB, Ring & Tube Complete (for 81T201)

1-1/2” x 22-3/4” VB, Ring & Tube Complete (for 81T221)

1-1/4” x 10” VB, Ring & Tube Complete (for 81T291)

3/4” x 11-1/2” VB, Ring & Tube Complete (for 81T231)

1-1/2” x 10” VB, Side Outlet Tee Tube Complete

060004A 1-1/2” Spud Flange

3/4” CP Coupling Nut, 3/4” Washer & 3/4” Spud Flange

1-1/4” Lockring (used with 060004A for 1-1/4” Spud)

060778A 1-1/2” Rough Coupling Nut & Washer

1-1/4” Rough Coupling Nut & Washer

3/4” CP Coupling Nut, 3/4” Washer & 3/4” Spud Flange

060083A *

1-1/2” Rubber Slip Joint Washer (12/pkg)

061069A

Hardwire Converter & Rigid Connection Assy for 3rd Gen E-FV

060344A

Filter Screen Kit (12/pkg) for Teck tails

204320 204320 204320 204320

060972A

Filter Screen Kit (6/pkg) for Sloan

/Zurn

tails (-30 models)

81T2__ 1__ __A - __ __ - __ __

Valve Type

0 = W/C (Water Closet)

2 = W/C - 22” outlet tube

3 = Urinal

Power Option

BT = Battery

HW = Hardwired

Additional Options

(leave blank if not applicable)

30 = w/Sloan ZurnTail

20 = Less Stop Assy

1 = V/B Tube w/Tee Assy (WC only)

Alternate Flush Volumes

(leave blank if not applicable)

6 = 6 litre (1.6 gal) fixed flush (WC only)

13 = 13 litre (3.4 gal) flush (WC only)

48 = 4.8 litre (1.27 gal) fixed flush (WC only)

38 = 3.8 litre (1.0 gal) fixed flush (Urinal only)

19 = 1.9 litre (0.5 gal) fixed flush (Urinal only)

05 = 0.5 litre (0.13 gal) fixed flush (Urinal only)

Record model number:

061073A

Urinal Board for 3rd Generation E-FV

060704A

060771A

060772A

Transformer (110 to 24 VAC) for 5 Sensor Modules**

Transformer (110 to 24 VAC) for 10 Sensor Modules**

Transformer (110 to 24 VAC) for 25 Sensor Modules**

10b

060078A *

Screws for Cast Cap (4/pkg)

Summary of content (7 pages)

PAGE 1
Record model number: 81T2__ 1__ __A - __ __ - __ __ Valve Type 0 = W/C (Water Closet) 2 = W/C - 22” outlet tube 3 = Urinal 2 Alternate Flush Volumes 204320 6 = 6 litre (1.6 gal) fixed flush (WC only) 13 = 13 litre (3.4 gal) flush (WC only) 48 = 4.8 litre (1.27 gal) fixed flush (WC only) 38 = 3.8 litre (1.0 gal) fixed flush (Urinal only) 19 = 1.9 litre (0.5 gal) fixed flush (Urinal only) 05 = 0.5 litre (0.
PAGE 2
Product # A Max. B + 11mm ( / C ) Min. 7 16” All 81T201BT/ 81T201HW variations* 292mm (11½”) 121mm (4¾”) 54mm (2.13”) All 81T231BT/ 81T231HW variations* 330mm (13”) 121mm (4¾”) 54mm (2.13”) * Note: -30 models, B = 114mm - 131 mm (4.5” to 5.18”) BEFORE THE FIRST FLUSH (COMPLETE VALVES) FLUSH BOTH OLD AND NEW PIPES: It is important to FLUSH and CLEAN thoroughly both new and old water piping to ELIMINATE contaminants (eg. scale, sediment, gravel, cuttings, solder, etc.) from the line.
PAGE 3
INSTALLATION INSTRUCTIONS - BATTERY FLUSHOMETER (for Hardwire, skip to Step 3) Step 1: • Install battery flushometer to fixture. • Open inlet stop. Step 2: • Follow instructions on yellow static label (Figure 3). Note: The batteries are already installed and the product is in hibernation mode waiting to be activated. • After you remove the yellow label, you must push the manual over-ride button three times within five seconds to activate the valve and to place it into operation mode.
PAGE 4
ENTER SETUP MODE EXIT SETUP MODE TO ENTER SETUP MODE - HOLD DOWN OVERRIDE BUTTON UNTIL BLUE LIGHT PRESENT. RELEASE BUTTON. TO EXIT SETUP AND RETURN TO OPERATION MODE - HOLD DOWN OVERRIDE BUTTON UNTIL BLUE LIGHT PRESENT. RELEASE BUTTON. HOLD DOWN OVERRIDE BUTTON UNTIL SOLID BLUE LIGHT PRESENT TO ADVANCE RELEASE BUTTON. HOLD DOWN OVERRIDE BUTTON UNTIL SOLID BLUE LIGHT PRESENT TO ADVANCE RELEASE BUTTON. Fig. 6 ▼ ▼ ▼ 7.1 RANGE ADJUSTMENT MODE 7.2 DUAL FLUSH ADJUSTMENT MODE (W/C only) 7.
PAGE 5
Exiting Set-Up Mode: • Can be accomplished in one of two ways; 1. During the 24 Hour Adjustment feature, press and hold down override button for 5 seconds until solid blue light is present. Release override button. 2. During all modes, valve will revert back to operation mode automatically if the override button is not pressed within 2 minutes.
PAGE 6
PROBLEM SOLVING & MAINTENANCE SUGGESTIONS: NO LIGHTS - NO POWER Check that the 4 “AA” batteries are positioned properly in the battery holder. Use the +/- signs on the batteries and the +/- signs on the battery holder for correct positioning. If the batteries are positioned correctly, but there are still no lights, replace with 4 new “AA” Alkaline batteries (see Battery Replacement on page 5). NOTE: DO NOT USE EXCESSIVE FORCE to close the inlet stop stem.
PAGE 7
Delta Commercial Faucet Limited Warranty All parts of the Delta® HDF® and TECK® faucets are warranted to the original consumer purchaser to be free from defects in material, finish and workmanship for a period of five (5) years unless otherwise specifically stated in the catalogue and price book. This warranty is made to the original consumer purchaser and shall be effective from date of purchase as shown on purchaser’s receipt.