Specification Sheet

Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
Refer to www.specselect.com for individual models.
Product supplied as shown by solid lines. All items shown by dotted lines supplied by others.
Page 6.C.8 DSP–1600T9 Rev. G
Electronic Washdown Urinal
1600T and 1601T Series
Note: Measurements may vary ± 6mm (0.25")
Approvals:
• IAPMO listed to CSA B125.3 and ASSE 1037
• ADA Compliant and meets Handicapped
Accessibility Standard ICC/ANSI A117.1
of less than 5 lbs. operating force.
(Contact Delta Representative for State and/or
Local Approvals.)
OPERATION:
• 8 second blocking time.
• Activation delay:
0 seconds on urinal applications
• Adjustable flush volumes of 0.4 to 0.95
gallons (1.5 to 3.6 litres)
Factory set 0.5 gallons (1.9 litres)
• Selectable sensing distance:
12 to 28" in 4" increments.
Factory set to 20"
• Adjustable 24 hour courtesy flush
factory set to
off
1600T9001RI
AND
1600T9001TR
TYPICAL
INSTALLATION
102mm (4")
25mm (1")
Inlet 1/2" copper
203 x 206 x 102mm
(8" x 8 1/8" x 4")
control box
254 x 254mm
(10" x 10")
stainless steel cover plate
Infrared
sensor
Centerline
of inlet
152mm*
(6")
Back inlet
urinal connection
outlet hose
1600T9001
1600T ELECTRONIC FLUSH VALVE OPTIONAL ACCESSORIES:
4 TRANSFORMERS:
060704A 110 to 24VAC Class II 20VA (For 5 Sensor Modules)
060771A 110 to 24VAC Class II 40VA (Up to 10 Sensor Modules)
060772A 110 to 24VAC Class II 100VA (Up to 25 Sensor Modules)
4 CORDS:
060680A 4’ Solenoid Extension Wire
4
HARDWIRE CONVERTER:
060683A 24VAC to 6VDC Converter (Supplied standard on Hardwire models)
061047A 24VAC to 6VDC Converter with Battery Backup (Standard on ”-BB” models)
102mm (4")
Inlet 1/2" Copper
25mm (1")
254 x 254mm
(10" x 10")
Stainless Steel
Cover Plate
Infrared Sensor
Outlet -
3/8" MIP
Top Inlet
Urinal Connection
(Shown dotted)
BY OTHERS
152mm*
(6")
203 x 206 x 102mm
(8" x 8-1/8" x 4")
Control Box
1600T9003RI
AND
1600T9003TR
TYPICAL
INSTALLATION
HARDWIRE WITH
BATTERY BACKUP
Add suffix “-BB” to TR Product
Number. See DSP-BB for
detailed specification.
* See Maintenance and
Installation Guide for
complete sensor height
installation instructions
INSTALLATION NOTE:
Models must be installed on
fixtures providing sufficient air
gap protection against backflow.
DSP–1600T9 Rev. G