Installation Sheet

Page 2
210302 Rev. B
www.specselect.com
Item # Part #
Description
060799A
061025A
1
060704A
060771A
060772A
2
061273A**
061272A**
3
060679A
4
060072A
5
060680A
6 061244A
060674A
060675A
7 060073A
8a
061024A
8b
061169A
**
10a
060079A
11b
11c
12
13
14
15
16
17
18
060783A
19
060773A
060463A
20
060049A
21
22
23
24
25
NOTE: Refer to TECK flushometer repair parts and maintenance manual for additional parts and information.
* Each individual sensor module requires its own 24VAC to 6VDC hardwire converter.
** For valves manufactured before October 2014, you must replace both the sensor module and the cap/solenoid which are included
in; UR Kit - 061284A or WC Kit - 061285A.
*** For valves manufactured before January 2013, you must replace the sensor module and the cap/solenoid, diaphragm assembly
and the brass seat with O-ring which are included in; UR Kit - 061286A or WC Kit - 061287A.
Universal TECK washers and O-rings repair kit
Universal TECK parts washers and O-rings repair kit
Transformer (110 to 24 VAC) for 5 sensor modules*
Transformer (110 to 24 VAC) for 10 sensor modules*
Transformer (110 to 24 VAC) for 25 sensor modules*
Sensor module - urinal flush valve
Sensor module - water closet flush valve
Over-ride button assembly
4 pieces No. 6 - 32 x 2” flat head stainless steel screws and security spanner bit package
for 4-1/2“ (114 mm) cover
Solenoid Extension Wire
4-1/2” x 4-1/2” (114 mm x 114 mm) (shown) stainless steel cover with studs and screws
14” x 14” (356 mm x 356 mm) (not shown) stainless steel cover with studs and screws
14” x 20” (356 mm x 508 mm) (shown) stainless steel cover with studs and screws
14” x 20” (356 mm x 508 mm) stainless steel cover, less sensor hole, with studs & screws
4 pieces No.10 - 32 x 2” flat head stainless steel screws and security spanner bit package
for 14“ (356 mm) covers
Regulating screw and O-ring
Cap/Solenoid & Regulating Screw Assembly
061216A***
Diaphragm Guide Assembly for Water Closets
060508A
Poppet Pin Pack (3/pkg) (0.5L Valves only)
062025A
Washer (3/pkg) (required for 6.0 & 4.8L Valves only)
062007A***
Brass seat with O-ring
Diaphragms only (12 pcs)
060479A
Handle and screw
060845A
Retrofit check stem unit, capnut and handle complete
060082A
O-rings (20 pcs)
060785A
Vacuum breaker sleeve complete
060094A
Coupling ring
060782A
1-1/2” x 10” (38 mm x 254 mm) V.B., coupling ring and tube complete
1-1/2” x 22-3/4” (38 mm x 578 mm) V.B., coupling ring and tube complete
060778A
1-1/2” (38 mm) rough coupling nut and washer
1-1/4” (32 mm) rough coupling nut and washer
3/4” (19 mm) polished chrome coupling nut, 3/4” washer and 3/4” spud flange
060083A
1-1/2” (38 mm) rubber slip joint washers (12 pcs)
3/4” (19 mm) rubber and fibre slip joint washers (12 pcs)
060683A* 24VAC to 6VDC converter
060344A Filter screen kit (12/pkg)
060342A
Plug and O-ring for handle end
060681A
Flat battery holder (4 “C” cell batteries)
060684A Square battery holder (4 “C” cell batteries)
Diaphragm Guide Assembly for Urinals
10b
061217A***
26
060923A
Nut retainers for access box frame (12/pkg)
27
061243A
Smooth end brass tube and 1.5” (38 mm) MIP connection for 1.5” (38 mm) FIP back inlet
prison fixture
061265A
9
060078A
Screws for Cap (4/pkg)
11a
060507A
Poppet Pin Pack (3/pkg) (also see 11b)