User's Manual

2 Cisco WAP125 Quick Start Guide
Package Contents
• Wireless Access Point
• Power Adapter
• This Quick Start Guide
• Ethernet Cable
• Technical Support Contact
• Pointer Card China RoHS
• EU Directives 1999/5/EC Compliance Information (for EU SKU only)
1 Before You Begin
Before you begin the installation, make sure that you have the following equipment
and services:
• A computer with one of the following browser support:
– Internet Explorer 9.0 or later
– A recent version of either Chrome, Firefox or Safari
• Tools for installing the hardware
• FindIT tool for locating the access point
• One or more Ethernet network switches with PoE
• Mobile devices (iPhone, Android, etc.) via wireless setup SSID. (Configure via
Wi-Fi mobile device with a web browser.)
2 Cisco WAP125 Features
Front Panel
The front panel of the Cisco WAP125 consists of one system LED. For full
descriptions of the colors of the lights and their indications, see Verifying the
Hardware Installation.
Back Panel
RESET—See Rebooting the Cisco WAP125 or Resetting to Factory Defaults for
information on the RESET button.
LAN (PoE)—The RJ-45 Ethernet port is used to power the Cisco WAP125 using PoE.
It is an auto-sensing, Gigabit Ethernet (802.3) port used to connect the Cisco