User's Manual

Chapter 4 On-Screen Display (OSD) Settings

OSD Menu Controls

Qumi has an On-Screen Display (OSD) settings menu (Menu button can be found on top of the

projector or the remote control) that allows you to make adjustments and change settings, such

as display and audio settings. The OSD menu has 11 sub-menus:

 Language – Allows for the selection of the language for the OSD Menu. Press OSD

Menu key for entry. Select and move to the desired language using the Arrow Keys

and then press the Menu or Exit key to confirm and exit.

 Input Source – Allows for the selection of the input source for the projector. Press

OSD Menu key for entry. Select and move to the desired input source using the

Arrow Keys and then press the Menu or Exit key to confirm and exit.

• Display Mode Settings – Allows for the adjustment of the projector’s image display

settings to the viewer’s preference. The display settings consist of Bright,

Presentation, Movie and User modes. Select and move to the desired display mode

using the Arrow Keys and then press the Menu or Exit key to confirm and exit.

 Sound Mode Settings – Select or adjust the projectors audio settings. The audio

settings consist of Standard, Music, Movie, Sports, and User modes. Select and move

to the desired sound mode using the Arrow Keys and then press the Menu or Exit key

to confirm and exit.

• Colour Temperature - Adjust color temperature of screen and RGB parameters to the

user’s preference. Select and move to the desired color temperature mode using the

Arrow Keys and then press the Menu or Exit key to confirm and exit.

• Aspect Ratio Modes – Select the aspect ratio to adjust how the image appears on the

screen. Select and move to the target mode by using Up/Down Key and then press the

Menu or Exit key to confirm and exit.

 Projection Mode – Allows for the selection of the projection mode (Depends on

mounting method). Press the Entry button to choose from the available modes.

• Keystone Correction - Corrects misaligned or distorted images so that projection is

displayed correctly on the screen. Select and move to the keystone correction mode

using the Arrow Keys and then press the Menu or Exit key to confirm and exit.

 Reset All - Restore factory settings and default parameters of the system, including

image, sound, projection, keystone, etc.

 Status - Displays relevant system information (such as software version)

 Software update (USB) - Updates system software. Place the software in the root

directory of USB drive, and then press OK Key to enter the update confirmation

interface and select Yes to update the software.

Note:

If the OSD menu is non-active for 10 seconds, it will disappear.