User Manual

DFZM-TS220
User Manual Sheet of 24 Sep. 5, 2012
Proprietary Information and Specifications are Subject to Change
8
Easy Mode
Easy Mode provides a simple user interface for packet transmission and reception. The
user can select between two test modes; Packet TX and Packet RX in the bottom panel.
Quick Start
A packet TX/RX test between two devices can be started simply by selecting 'Packet TX'
on one of the devices and 'Packet RX' on the other. Press start on the 'Packet RX' device
first, then press start on the 'Packet TX' device to start the packet transmission.
Select Configuration
Select a configuration with the predefined protocol and packet format, data rate and
frequency. Each configuration programs the connected device with a list of register
values according to the configuration parameters. Make sure that the same configuration
is used on both the transmitting and receiving device. Details of the selected packet
format can be seen in either the 'Packet TX' or 'Packet RX' panels at the bottom of the
screen.
Expert Mode
Expert Mode provides a more advanced user interface than Easy Mode. From the Expert
Mode the user can change advanced RF parameters for the connected device. The expert
mode includes a typical settings panel, an RF parameter panel and the following test
function panels: Continuous TX, Continuous RX, Packet TX, Packet RX and RF Device
Commands.
The various panels visible from Expert Mode are described in the following sections.