Better Everyday ELECTRIC OIL FILLED RADIATOR Get Started This short guide is not intended to explain all the functions of the appliance. Please read all of the owner’s instruction booklet before use.
HOW TO SET UP 2 1 Plug the unit into an outlet. 4 Push dial to confirm hour. 2 3 Hour digits will blink. 5 Minute digits will blink. Set clock: Turn dial to set current hour in military time (ex: 13 equals 1pm; 22 equals 10pm ). 6 Turn dial to set current minutes. 7 Push dial to confirm minutes. A long beeping sound will be heard.
MANUAL OPERATION MODE (TEMP/POWER LEVELS) 2 1 Push the standby/power button to turn unit ON. 3 Turn dial to select desired temperature. New temperature is now set.* 4 Turn dial to desired power level. (see chart below) If you want to change power level, press dial twice and follow steps 4 and 5. 5 * Note: It is not possible to switch between Fahrenheit and Celsius. Push dial to confirm power level selection.
SELECTED VERSUS WORKING POWER LEVELS The unit will automatically switch between the unit’s working power levels depending on the difference between your desired selected temperature and the actual room temperature. Note: If none of the working power level bars are lit, the unit is not consuming any wattage.
PROGRAMMING TIMER OPERATION MODE Setting Timer Temperatures T1 and T2 1 2 3 Turn unit ON (display should show Push dial once, then Turn dial till clock temperature and power level will blink. blinks. power level). 5 To modify red (T2), turn dial till red light blinks. Push dial to confirm. Or, to modify green (T1 already flashing), push dial to confirm. 6 Display will show the current setting for the green or red temperature. 7 Turn dial to the desired temperature. Push dial to confirm.
SETTING TIME PERIODS FOR T1 AND T2 Changing 24 Hour Daily Timer Program 1 Turn off unit to STANDBY mode (display shows time). 2 Push and hold the timer button for 5 seconds. 6 6 Turn dial to select the ending time for the first or previous program selected. Push dial to confirm. 4 3 Display will show 00:00 (midnight). Green LED (T1) will be blinking. 7 The ending time will appear and green (T1) or red (T2) LED indicator will blink. 5 Turn dial to select green (T1) or red (T2).
ACTIVATING AND DISPLAYING TIMER SETTINGS Activate Timer Settings (follow steps 1- 2) 1 Push STANDBY/ POWER button to turn on unit. 2 Push the timer button to activate the timer program. General Note: If you don’t wish to set your own timer settings, you can use the preset settings (see page 4). Note for step 4: A switch from red to green or green to red indicates when programmed timer settings are scheduled to change.
www.delonghi.
