user manual

6
A. Display
B. “-/+” buttons to decrease/increase time and
temperature
C. MODE button to select time/temperature modes
D. ON/OFF button
E. Red POWER light
F. Green READY light
G. Safety microswitch
H. Min/max oil level indicator
I. Basket support
J. Oil drain tap (not on all models)
K. Oil drain tap cover (not on all models)
L. Housing
M. Handle
N. Control unit guide
O. Cover with handle
P. Viewing window
Q. Filter (if present)
R. Removable bowl
S. Basket with folding handle
T. Heating element
U. Cord storage compartment (if present)
V. Thermal cut-out device reset button
A DEEP FRYER FALLING FROM A HIGH PLACE MAY
CAUSE SERIOUS BURNS. NEVER LEAVE THE CORD
HANGING FROM THE EDGE OF THE SURFACE THE
DEEP FRYER IS RESTING ON WHERE IT COULD BE
GRASPED BY A CHILD OR GET IN THE WAY OF THE
USER. DO NOT USE EXTENSION CORDS.
IMPORTANT SAFEGUARD
KEEP OUT OF REACH OF CHILDREN
DESCRIPTION
THERMAL CUT-OUT DEVICE
The appliance is fitted with a thermal cut-out device which interrupts heating in the event of incorrect use or
faulty operation. Once the appliance has cooled down, use a toothpick to delicately press the thermal cut-
out device reset button (V) (see fig. 1). If the appliance is still not operational, contact a service center autho-
rized by the manufacturer.
INSTRUCTIONS
Before using the deep fryer for the first time, clean the basket, bowl and cover thoroughly with hot water and
detergent. The control unit with power cord and heating element can be cleaned with a damp cloth. Check
that water does not enter into the control unit and that there is no water left in the bottom of the removable
bowl. Dry all parts thoroughly. Make sure the control unit is correctly fastened to the deep fryer body. The
safety micro-switch (G) will prevent the appliance from operating unless the control unit is correctly positio-
ned in the guide (N). The deep fryer is now ready for use.
IF THE DEEP FRYER HAS A CORD WITH MAGNETIC CONNECTOR
First, connect the magnetic connector to the appliance
as shown in figure 4B, making sure the protruding
part of the connector (
X) is correctly inserted into the
corresponding outlet on the appliance. Then plug the
cord into the outlet.
Warning
Never leave the appliance plugged into the outlet if
the magnetic connector is not fitted to the deep
fryer, figure 3. If the magnetic connector does not
remain in place, check that it has been inserted cor-
rectly, (see figure 4B). If the problem persists, con-
tact an authorized service center. When the
appliance is in operation, always leave free space
around the magnetic connector to prevent it from
becoming detached. Use type LM-132 cords provi-
ded by a De'Longhi authorized service center only.
Meijer.com