ETAM36_AU/02.
Bean to cup espresso and DE cappuccino machine Instruction for use GB ETAM36.
B2 B3 B4 B5 B1 B7 B12 B11 B10 B9 B8 D1 D2 C1 C2 B6 C4 D3 C5 C3 D4 D5 D6 C6 D7 2 D8
A6 A5 A1 A8 A7 A2 A3 A9 A4 A7 A10 A24 A23 B A11 A22 A21 A12 A20 A13 A19 A14 A18 A16 A15 A17 3
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 4 16
17 18 21 22A 25 26 19 22B 20 23 27A 24 27B 28 32 29 30 30 5 33
Contents DELIVERING HOT WATER AND STEAM................................. 14 Delivering hot water ..............................................................................14 Changing the quantity of water delivered automatically. ......................15 Steam delivery........................................................................................15 Tips for using steam to froth milk...........................................................15 Cleaning the spout after use.......................
INTRODUCTION • Thank you for choosing the ETAM36.365 automatic bean to cup espresso and cappuccino machine. We hope you enjoy using your new appliance. Take a few minutes to read these instructions. This will avoid all risks and damage to the appliance. • • • Symbols used in these instructions Important warnings are identified by these symbols. It is vital to follow these warnings. • Danger! Failure to observe the warning may result in life threatening injury by electric shock.
B9. milk button: to deliver a cup of milk B10. latte button: to deliver a latte B11. cappuccino button: to deliver a cappuccino B12. FLAT WHITE button: to deliver a flat white (When in the settings menu, press to scroll through the menu items) Please note: Keep these instructions. If the appliance is passed to other persons, they must also be provided with these instructions. DESCRIPTION Description of milk container (page 2 - C ) C1. Milk container lid C2. Froth adjustment and CLEAN dial C3.
Connecting the appliance softener filter as described in the section “WATER SOFTENER FILTER” (page 19). If your model is not provided with a filter, you can request one from De’Longhi Customer Services. Important! Check that the mains power supply voltage corresponds to the value indicated on the rating plate on the bottom of the appliance. Connect the appliance to an efficiently earthed and correctly installed socket with a minimum current rating of 10A only.
MENU SETTINGS 1. Press the MENU/ESC button to enter the menu; 2. Press the scrolling arrow (< or >) (fig. 9) until “Auto-start” is displayed; 3. Press the button. “Enable?” is displayed; 4. Press the button to confirm; 5. Press the scrolling arrow (< or >) to choose the hour; 6. Press the button to confirm; 7. Press the scrolling arrow (< or >) (fig. 9) to change the minutes; 8. Press the button to confirm; 9. Press the MENU/ESC button to exit the menu.
1. Press the MENU/ESC button to enter the menu; 2. Press the scrolling arrow (< or >) (fig. 9) until “Set language” is displayed; 3. Press the button; 4. Press the the scrolling arrow (< or >) until the required language is displayed ; 5. Press the button to confirm; 6. The set language is displayed; 7. Press the MENU/ESC button to exit the menu. 3. Press the button; 4. Press the scrolling arrow (< or >) (fig.
To display, proceed as follows: 1. Press the MENU/ESC button to enter the menu; 2. Press the scrolling arrow (< or >) (fig. 9) until “Statistics” is displayed; 3. Press the button; 4. By pressing the scrolling arrow (< or >) (fig. 9), you can check: - how many coffees have been made; - the total number of cappuccinos and milk based coffees; - the total number of litres of water delivered; - how many times the machine has been descaled; - how many times the water softener filter has been replaced. 5.
- 1 cup, if you want 1 coffee (fig. 15); - 2 cups if you want 2 coffees (fig. 17). 3. Lower the spout as near as possible to the cups (fig. 16). This makes a creamier coffee . 4. Press the button corresponding to the number of coffees required (1 cup or 2 cups ). 5. Preparation begins. The amount of coffee selected is displayed together with a progress bar which gradually fills as preparation progresses. 6. Preparation begins.
No froth FLAT WHITE/ MILK (hot milk) Min. froth latte Max. froth CAPPUCCINO/ MILK (frothed milk) ing underway, Please wait” is displayed, together with a progress bar which gradually fills as the operation proceeds. Cleaning stops automatically. 4. Turn the dial back to one of the froth selections. 5. Remove the milk container and always clean the steam nozzle with a sponge (fig. 26).
avoid splashes). 3. Press the button (fig. 3). “Preparation underway” is displayed (if required). Then hot water is delivered and “HOT WATER” is displayed, together with a progress bar which fills gradually as preparation proceeds. 4. The machine delivers about 250 ml of hot water, then delivery stops automatically. To interrupt delivery of hot water manually, press the button again. 2. 3. Changing the quantity of water delivered automatically.
• Cleaning the coffee spouts 1. Clean the coffee spouts regularly with a sponge or cloth (fig. 32). 2. Check the holes in the coffee spout are not blocked. If necessary, remove coffee deposits with a toothpick (fig. 33). Check the condensate tray and empty if necessary (fig. 29). Important! When removing the drip tray, the grounds container must be emptied, even if it contains few grounds.
water (see figure). 6. Check that the intake tube and spout are not clogged with milk residues. 7. Replace the dial (lining up the arrow with the word “INSERT”), the spout and the milk intake tube. 8. Place the lid back on the milk container. Please note! If the infuser is difficult to insert, before insertion, squeeze the two levers shown in the figure to make it smaller.
ing to a 100 ml pack) marked on the back of the tank (fig. 36), then add water (1 litre) up to level B (fig. 36) and put the water tank back. 8. Place an empty container with a minimum capacity of 1.5 litres under the hot water spout (fig. 7). soft water l Important! Danger of burns Hot water containing acid flows out of the hot water spout. Avoid contact with splashes of water. 9. Press the button to confirm that you have added the solution.
5. Place the filter in the 39 water tank and submerge it completely for ten seconds, tilting it to enable the air bubbles to escape (fig. 39). 6. Insert the filter into the filter housing and press as far as it will go (fig. 40A). 40A 7. Close the tank with the lid (fig. 40B), and then replace the tank in the machine. When you install the filter, you must notify the appliance 40B of its presence. 8. Press the MENU/ESC button to enter the menu; 9. Press the scrolling arrow (< or >) (fig.
DISPLAYED MESSAGES DISPLAYED MESSAGE POSSIBLE CAUSE SOLUTION FILL TANK Insufficient water in the tank. Fill the tank with water and/or insert it correctly, pushing it as far as it will go until it clicks into place. EMPTY GROUNDS CONTAINER The grounds container (A18) is full. Empty the grounds container and drip tray, clean and replace (fig. 29). Important: when removing the drip tray, the grounds container MUST be emptied, even if it contains few grounds.
TROUBLESHOOTING Below is a list of some of the possible malfunctions. If the problem cannot be resolved as described, contact customer services. PROBLEM POSSIBLE CAUSE SOLUTION The coffee is not hot. The cups were not preheated. • • Enable the cup warmer, leave the cups at least 20 minutes to warm up. Warm the cups by rinsing them with hot water (PLEASE NOTE you can use the hot water function). The infuser has cooled down because 2/3 minutes have elapsed since the last coffee was made.