Owners Manual

Figure 27. Removing and installing the riser card

1. expansion card bracket 2. screw (2)

3. riser card

Related Links

Removing the system board assembly

Removing the expansion card

Installing the riser card

CAUTION: Many repairs may only be done by a certified service technician. You should only

perform troubleshooting and simple repairs as authorized in your product documentation, or as

directed by the online or telephone service and support team. Damage due to servicing that is

not authorized by Dell is not covered by your warranty. Read and follow the safety instructions

that are shipped with your product.

Follow the safety guidelines listed in the Safety instructions section.

1. Place the riser card into the expansion card bracket.

2. Replace the screws that secure the riser card to the expansion card bracket.

1. Install the expansion card.

2. Install the system board assembly.

3. Reconnect the peripherals and connect the system to the electrical outlet.

4. Turn on the system, including any attached peripherals.