Owners Manual

Figure 23. Removing and installing a processor

1. socket release lever 2. orientation arrow

3. processor 4. notch in processor (4)

5. processor shield 6. socket release lever (2)

7. socket pin array 8. notch

Related Links

Removing the system board assembly

Removing the heat sink

Installing a processor

CAUTION: Many repairs may only be done by a certified service technician. You should only

perform troubleshooting and simple repairs as authorized in your product documentation, or as

directed by the online or telephone service and support team. Damage due to servicing that is

not authorized by Dell is not covered by your warranty. Read and follow the safety instructions

that are shipped with your product.

NOTE: When installing only one processor, the processor must be installed in the processor 0 (for

the socket location, see the System board connectors section).

NOTE: If you are upgrading your processors, prior to upgrading your system, download and install

the latest system BIOS version from Dell.com/support/home. Follow the instructions included in

the file download to install the update on your system.