Setup Guide

Table 14. RDP connect options
Option Description
The value of $SYS_VAR is a system variable found in Table:
System variables.
NOTE:
The combination of all the variables such as $IP@$DN are
also supported.
Username-enc=an encrypted username Specifies an encrypted string as a username for a connection.
[WyseVDA={no, yes}]
Default is no.
Yes/no option to enable Wyse Virtual Desktop Accelerator for
all RDP sessions.
PCoIP connect options
Table shown here contains the supported options used for RDP connections after you use the Connect=RDP parameter/
selection.
Any option in PCoIP Connect Options that is used in a {username}.ini file will return to the default value set for that option in
the wnos.ini file after a user sign-off.
For example, if your {username}.ini file contains the option Reconnect=yes (so that a lost connection will restart 20 seconds
after disconnection) and you sign off of the thin client, then the Reconnect value will return to the original default value of
no (Reconnect=no) contained in the wnos.ini file—so that others who sign in can use their own user profile assuming the
administrator has not changed the default values in the wnos.ini file.
PCoIP connect: options
Table 15. PCoIP connect: options (continued)
Option Description
Autoconnect={0 to 99}
Default is 0.
Use for automatically starting a session after you sign in, if
sign-on is enabled.
The value of 0 – 99 is the delay in seconds before auto-
starting the session.
Colors={256, 32k, 64k or high, 16m, true} Default is high.
Session color mode. For faster display performance, use 256
colors for the session.
● 256 is 8-bits
● 32k is 15-bits
● 64k or high is 16-bits
● 16m is 24-bits
● true is 32-bits
NOTE:
● 64k is the same value as high.
● 16m — 24-bits over ICA is only supported by Windows
XP and Windows 2003 server. It is not supported by
Windows Server 2008 or newer.
Connect Parameter: Options 111