Administrator Guide
Setting the General System Preference
To congure the general settings for system preference:
1 From the desktop menu, click System Setup, and then click System Preferences.
The System Preference dialog box is displayed.
2 Click the General tab, and use the following guidelines:
a Screen Saver — Allows you to select the type of screen saver you want. The default is to Turn O Screen.
Other selections available include Flying Bubbles , Moving Image and Showing Pictures which are screen savers with the
monitor remaining on.
b Timer — Select a time after which the screen saver is to be activated; either disable, 1 minute, 5 minutes, 10 minutes (default),
15 minutes, or 30 minutes.
When the thin client is left idle for the specied idle time, the screen saver is initiated.
c Locale — Select a language to be activated for the user login-experience; either French, German, or default English.
NOTE
: Locale changes the language for the user login-experience screens only displayed during boot-up and login and
not the conguration or administrator screens.
Only the following messages are applicable for French locales:
• Username/Password/Domain
• System Information
• Shut down the system, restart the system, reset the system setting to factory default
• OK, Cancel
• Initiating devices
• Looking up IP address from DHCP, Note: Pressing CTRL-ESC keys cancel out of network check
• Retry DHCP for an IP address
• Waiting for network link. Verify that network cable is plugged into back of unit
Conguring
Thin Client Settings 67