Release Notes
Summary Work around
The Plantronics USB headsets volume controls does not work
when connected directly to a thin client but works when you
connect using the user interface settings.
Adjust the volume controls sound menu using Microsoft Windows
task bar.
The strings get overlapped when the language setting is changed
to Dutch.
No workaround available in this release.
The thin client fails to boot when the display resolution is changed
and rebooted
There is no workaround, but a possible solution is to do a factory
reset to reboot the thin client.
802.1x: TLS user and machine authentication works even when you
use the invalid privatekeypassword .
No workaround available in this release.
The thin client checks for updates three times if the INI parameter
DelayedUpdate.Recheck=Yes is used.
Use DelayedUpdate.recheck=No INI parameter which will
enable system check only on reboot.
The IPV6: Traceroute is enabled even if the IPV6 Switch is in OFF
state.
No workaround available in this release.
The auto power option does not work in Wyse 5060 thin client
even if the AutoPower=Yes INI parameter is used in Wyse
Management Suite and Wyse Device Manager.
No workaround available in this release.
Supported platforms
The following are the platforms supported in this release:
Table 7. Supported platforms
Thin client Memory conguration—Flash/RAM BIOS Version
Wyse 5020 thin client—D50Q 8GB / 2GB 2.0F
Wyse 7020 thin client—Z50Q 8GB / 2GB 2.0F
Wyse 3030 LT thin client 4GB / 2GB 1.0G
Wyse 5060 thin client 16GB / 4GB 1.0G
Wyse 3040 thin client 16GB / 2GB 1.2.3
Supported peripherals
This section contains the supported peripherals for Wyse 3040 thin client and general peripherals in this release.
Table 8. Supported peripherals for Wyse 3040 thin client
Type Model Description
Headset UC300 Dell Pro Stereo Headset UC300 - Lync
Certied
Headset Pro 935 Jabra Pro 935 MS Wireless headset
(Mono) - Oce Centric
Monitors E2316H Dell 23 Monitor- E2316H
ThinLinux v1.0.7 and v1.0.7.1 15