Users Guide

Mounting the thin client
Use the following instructions for mounting the client to the P-series mount.
1 Attaching 3040 mount —Install 3040 mount on the P-series mount with the (4) M4x0.7 screws included in the kit.
NOTE: The four clips that hold the Dell Wyse 3040 onto the mount must be in the horizontal orientation.
2 Attaching the Power Adaptor Holder —Slide the small hooks downward into the vertical slotted holes and the large hooks onto the
top edge of the mount. Use the M2.5x0.45 screw provided to secure the power adapter holder onto the mount where indicated.
3 Attaching the P-series mount to the monitor —Place the monitor panel face down on a soft cloth or cushion.
—Remove the stand from the monitor by pushing the monitor’s quick release button.
NOTE
: For ease of installation, position the monitor with the base of the stand hanging over the edge of the table.
3
Mounting the thin client 7