Concept Guide

1940| show ucc client-info Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Status Call Type Client Health UCC Score UCC-Band MOS MOS-Band
------ --------- ------------- --------- -------- --- --------
ACTIVE Voice 62 81.52 Good 4.17 Good
Call History:
-------------
CDR ID UCC Call ID Client IP Client Name ALG Dir Called To Dur(sec) Orig-Time
------ ----------- --------- ----------- --- --- --------- -------- ---------
54 23 10.15.88.245 Alex skype4b OG Mike 847 Jan 16
02:45:22
53 22 10.15.88.245 Alex skype4b OG Ken 789 Jan 14
06:53:41
Status Reason Call Type Client Health UCC Score UCC-Band MOS MOS-Band
------ ------ --------- ------------- --------- -------- --- --------
SUCC Terminated Voice 49 71.72 Good 3.85 Good
SUCC Terminated Voice/Conf Call 44 68.22 Fair 4.13 Good
The output of this command includes the following information:
Column Description
Station Report
Client IP
Displays the IP address of the VoIP client.
Client MAC
Displays the MAC address of the VoIP client.
Client Name
Displays the username of the VoIP client.
AP-Name
Displays the name of the AP handling the VoIP call.
SNR
Displays the Signal-to-noise (SNR) ratio. SNR is the power ratio between
an information signal and the level of background noise.
Avg Tx Rate(Mbps)
Displays the average transmission rate in Mbps.
Tx Drop(%)
Displays the transmission packet drop in percentage.
Tx Retry(%)
Displays the transmission retry in percentage.
Avg Rx Rate(Mbps)
Displays the average receive rate in Mbps.
Rx Retry(%)
Displays the receive retry in percentage.
Un-steerable (reason)
Displays the reason for steering/not steering the client to another band.
Possible values are:
l Sticky
l Load Balance
l Band Steer
l Band Balance
l Administrator Added