Concept Guide

Parameter Description
application type if both the
same network policies apply to
both voice and voice signaling
traffic.
LLDP-MED application VLAN
Indicates the VLAN ID (0-4094) or
VLAN name of the VLAN used by
the application.
LLDP-MED application VLAN tagging
Indicates if the policy applies to a to
a VLAN that is tagged with a VLAN
ID or untagged. The default value is
untagged.
NOTE: When an LLDP-MED
network policy is defined for use
with an untagged VLAN, then the L2
priority field is ignored and only the
DSCP value is used.
LLDP-MED application Layer-2 priority
Displays a configured 802.1p
priority level for the specified
application type, where 0 is the
lowest priority level and 7 is the
highest priority.
LLDP-MED application Differentiated Services Code Point
Displays a configured
Differentiated Services Code Point
(DSCP) priority value for the
specified application type, where 0
is the lowest priority level and 63 is
the highest priority.
Command History
Command introduced in ArubaOS 6.2.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system. Enable or Config mode on master or local controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap lldp med-network-policy-profile | 1179