Concept Guide

1174| show ap lldp Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
PDU transmission
Shows if LLDP PDU transmission is enabled on the AP.
Reception of LLDP PDUs
Shows if LLDP PDU reception is enabled on the AP.
Transmit interval (seconds)
The interval between LLDP TLV transmission seconds. The
supported range is 1-3600 seconds and the default value is 30
seconds.
Transmit hold multiplier
This value is multiplied by the transmit interval to determine the
number of seconds to cache learned LLDP information before
that information is cleared.
If the transmit-hold value is at the default value of 4, and the
transmit interval is at its default value of 30 seconds, then
learned LLDP information will be cached for 4 x 30 seconds, or
120 seconds.
Optional TLVs
The AP sends the listed optional TLVs in LLDP PDUs.
802.1 TLVs
The AP sends the listed 802.1 TLVs in LLDP PDUs. By default, the
AP will send all 802.1 TLVs.
802.3 TLVs
The AP sends the listed 802.3 TLVs in LLDP PDUs. By default, the
AP will send all 802.3 TLVs.
LLDP-MED TLVs
Lists the LLDP-MED TLVs the AP will send in LLDP PDUs. By
default, the AP will not send any LLDP-MED TLVs
LLDP-MED network policy profile
Specifies the LLDP MED Network Policy profile to be associated
with this LLDP profile.
Command History
Command introduced in ArubaOS 6.2.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system. Enable or Config mode on master or local controllers