Concept Guide

287 | Services Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide
Figure 79 Services Window —ALE Integration
4. Specify the ALE server name or IP address.
5. Specify the reporting interval within the range of 6–60 seconds. The W-IAP sends messages to the ALE
server at the specified interval. The default interval is 30 seconds.
6. Click OK.
In the CLI
To enable W-IAP integration with the ALE server:
(Instant AP)(config)# ale-server <server-name| IP-address>
(Instant AP)(config)# ale-report-interval <seconds>
(Instant AP)(config)# end
(Instant AP)# commit apply
Verifying ALE Configuration on a W-IAP
To view the configuration details:
(Instant AP)# show ale config
To verify the configuration status
(Instant AP)# show ale status
Configuring OpenDNS Credentials
When configured, the OpenDNS credentials are used by Instant to access OpenDNS to provide enterprise-level
content filtering. You can configure OpenDNS credentials using the Instant UI or CLI.
In the Instant UI
To configure OpenDNS credentials:
1. Click More > Services > OpenDNS. The OpenDNS tab contents are displayed.
2. Enter the Username and Password to enable access to OpenDNS.
3. Click OK to apply the changes.