Concept Guide

148 | Captive Portal for Guest Access Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide
Figure 33 Captive Portal Rule for Internal Acknowledged Splash Page
Figure 34 Captive Portal Rule for External Captive Portal profile
Field Description
Rule type
Select Captive Portal from the drop-down list.
Splash Page
Type
Select any of the following attributes:
l Select Internal to configure a rule for internal captive portal authentication.
l Select External to configure a rule for external captive portal authentication.
Internal
If Internal is selected as splash page type, perform the following steps:
l Under Splash Page Visuals, use the editor to specify text and colors for the
initial page that would be displayed to users connecting to the network. The
initial page asks for user credentials or email, depending on the splash page
type configured
l To change the color of the splash page, click the Splash page rectangle and
select the required color from the Background Color palette.
l To change the welcome text, click the first square box in the splash page, type
the required text in the Welcome text box, and then click OK. Ensure that the
welcome text does not exceed 127 characters.
l To change the policy text, click the second square in the splash page, type the
required text in the Policy text box, and click OK. Ensure that the policy text
does not exceed 255 characters.
Table 29: Captive Portal Rule Configuration Parameters