Concept Guide

rf arm-profile
rf arm-profile <profile>
160MHz-support {Auto|contiguous-only|non-contiguous-only|none}
40MHz-allowed-bands {All|None|a-only|g-only}
80MHz support
acceptable-coverage-index <number>
active-scan (not intended for use)
aggressive-scan
assignment {disable|maintain|multi-band|single-band}
backoff-time <seconds>
cellular-handoff-assist
channel-quality-aware-arm
channel-quality-threshold <channel-quality-threshold>
channel-quality-wait-time <seconds>
client-aware
client-match
clone <profile>
cm-band-a-min-signal <cm-band-a-min-signal>
cm-band-g-max-signal <cm-band-g-max-signal>
cm-dot11v
cm-lb-client-thresh <#-of-clients>
cm-lb-signal-delta <cm-lb-signal-delta>
cm-lb-snr-thresh <dB>
cm-lb-thresh <%-of-clients>
cm-max-steer-fails <#-of-fails>
cm-mu-client-thresh <count>
cm-mu-snr-thresh <value>
cm-report-interval
cm-stale-age <secs>
cm-steer-backoff
cm-steer-timeout <secs>
cm-sticky-check-interval <secs>
cm-sticky-min-signal <-dB>
cm-sticky-snr <dB>
cm-sticky-snr-delta
cm-unst-ageout
cm-unst-ageout-intvl days <days> hours <hours>
dynamic-bw
dynamic-bw-beacon-failed-thresh
dynamic-bw-cca-ibss-thresh
dynamic-bw-cca-intf-thresh
dynamic-bw-clear-time
dynamic-bw-wait-time
error-rate-threshold <percent>
error-rate-wait-time <seconds>
free-channel-index <number>
interfering-ap-weight <number>
ideal-coverage-index <number>
load-aware-scan-threshold
max-tx-power <dBm>
min-scan-time <# of scans>
min-tx-power <dBm>
mode-aware
multi-band-scan
no ...
ota-updates
ps-aware-scan
rogue-ap-aware
scan mode {all-reg-domain|reg-domain}
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide rf arm-profile | 714