Concept Guide

622| mgmt-server profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description
location-enable
If enabled, Station RSSI/AP Neighbor messages will be sent to the
management server.
misc-enable
If enabled, the AP system statistics, specifications, and station steer
information will be sent to the management server.
monitored-info-enable
If enabled, the monitored AP or station information will be sent to the
management server.
monitored-stats-enable
If enabled, the monitored AP or station statistics will be sent to the
management server.
no
Disables the specified message filter.
sessions-enable
If enabled, the firewall DNA, application, and aggregate session
messages will be sent to the management server.
stats-enable
If enabled, the statistics for Radio, virtual APs, and clients will be sent
to the management server.
tag-enable
If enabled, tag messages will be sent to the management server.
uccmonitoring-enable
If enabled, the messages about the unified communications manager
will be sent to the management server.
voiceinfo-enable
If enabled, the voice call records will be sent to the management
server.
Usage Guidelines
Use this command to create a new management server profile on the controller or to edit the default profiles.
If you delete a management server profile that is applied to a destination server, you must re-apply a different profile
to the server or re-create the same profile for the message filtering process to continue.
Example
The following command configures a management server profile:
(host) (config) #mgmt-server profile AMP-profile
(host) (Mgmt Config profile "AMP-profile") #location-enable
(host) (Mgmt Config profile "AMP-profile") #voiceinfo-enable