Concept Guide

Table Of Contents
lacp port-priority
lacp port-priority <priority_value>
Description
Configure the LACP port priority.
Syntax
Parameter Description
<priority value>
Enter the port-priority value. The higher the value number the lower
the priority.
Range: 1 to 65535
Default: 255
Usage Guidelines
Set the port priority for LACP.
Related Commands
Command Description
lacp group
Enable LACP and configure on the interface
show lacp
View the LACP configuration status
show lacp sys-id
View the LACP system ID information
show interface port-channel
View information on a specified port channel interface
Command History
Release Modification
ArubaOS 3.4.1 Command introduced
Command Information
Platform Licensing Command Mode
All Platforms Base operating system Configuration Interface Mode (config-if) for
Master and Local controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide lacp port-priority | 561