Concept Guide

cp-bandwidth-contract
cp-bandwidth-contract <name> {pps <1..64000>}
Description
This command configures a bandwidth contract traffic rate which can then be associated with a whitelist
session ACL.
Syntax
Parameter Description Range Default
<name>
Name of a bandwidth contract. — —
pps
Set a bandwidth rate in packets/seconds. 1–64000 —
Example
The following example configures a bandwidth contract named “cp-rate” with a rate of 100 pps.
(host)(config) #cp-bandwidth-contract cp-rate pps 100
Related Commands
Command Description
show cp-bwcontracts
Display a list of Control Processor (CP) bandwidth contracts for
whitelist ACLs.
firewall cp
This command creates a new whitelist ACL and can associate a
bandwidth contract with that ACL.
Command History
Version Modification
ArubaOS 3.4 Command introduced.
ArubaOS 6.4.3.0 The unit of bandwidth contract traffic rate changed from Mbps or Kbps to pps.
The range for pps is 1–64000.
Command Information
Platforms Licensing Command Mode
All platforms This command requires the PEFNG license. Config mode on master controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide cp-bandwidth-contract | 298