Concept Guide

wlan rrm-ie-profile
wlan rrm-ie-profile <profile-name>
bss-aac-ie
clone
country-ie
enabled-capabilities-ie
no
pwr-constraint-ie
qbss-load-ie
quiet-ie
tpc-report-ie
Description
Configure an radio resource management RRMIEprofile to define the information elements advertised by an
AP with 802.11k support enabled.
Syntax
Parameter Description
bss-aac-ie
The AP will advertise in beacon and probe responses the BSS Available
Admission Capacity (ACC) IE, which contains information about the admission
capabilities for each User Priority / Access Category
clone
Copy the settings of an existing RRM IEprofile.
country-ie
The AP will advertise in beacon and probe responses the device's regulatory
domain.
enabled-capabilities-ie
The AP will advertise in beacon and probe responses support for radio meas-
urements in a device.
no ...
Disables the transmission of an IE in this profile.
pwr-constraint-ie
The AP will advertise in beacon and probe responses the regulatory maximum
transmit power for that current channel.
qbss-load-ie
The AP will advertise in beacon and probe responses the QoS Basic Service
Set (QBSS) Load IE, which contains information on the current station count,
channel utilization and available admission capacity levels in the QBSS
quiet-ie
The AP will advertise in beacon and probe responses the Quiet IE, which is
used to silence the channel for measurement purposes. When an AP uses a
quiet IE to schedule a quiet interval, stations may not transmit on that channel
during the quiet interval.
tpc-report-ie
The AP will advertise in beacon and probe responses information about its
transmit power controls.
Usage Guidelines
ArubaOS supports RRM Information Elements (IEs) for APs with 802.11k support enabled. All IEs are sent by
default.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide wlan rrm-ie-profile | 2338