Concept Guide

2318| wlan hotspot h2qp-wan-metrics-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Range Default
uplink_load <speed>
The percentage of the WAN uplink that
is currently utilized. If no value is set,
this parameter will show a default value
of 0 to indicate that the downlink speed
is unknown or unspecified.
1-100 0
(unspecifie
d)
uplink_speed <speed>
Use the uplink <speed> parameter to
indicate the current WAN backhaul
uplink speed in Kbps. If no value is set,
this parameter will show a default value
of 0 to indicate that the uplink speed is
unknown or unspecified.
0 -
2,147,483,6
47 kbps
0
(unspecifie
d)
wan_metrics_link_status
Define the status of the WAN Link by
configuring one of the following values.
The default link status is reserved,
which indicates that the link status is
unknown or unspecified.
l link_
down
l link_test
l link_up
l reserved
reserved
link_down
WAN link is down.
- -
link_test
WAN link is currently in a test state.
- -
link_up
WAN link is up.
- -
reserved
This parameter is reserved by the
Hotspot 2.0 specification, and cannot
be configured. This is the default link
status.
- -
Usage Guidelines
The values configured in this profile can be sent in an ANQP IE to provide hotspot clients information about
access network characteristics such as link status and the capacity and speed of the WAN link to the
Internet.Issue this command without the <profile> parameter to display the entire WAN metrics profile list,
including profile status and the number of references to each profile. Include a profile name to display detailed
configuration information for that profile.
Examples
The example below shows that the controller has three configured WAN metrics profiles. The References
column lists the number of other profiles with references to the operator-friendly name profile, and the Profile
Status column indicates whether the profile is predefined. User-defined profiles will not have an entry in the
Profile Status column.
(host) (config) #show wlan hotspot h2qp-wan-metrics-profile
H2QP WAN Metrics Profile List
-----------------------------
Name References Profile Status
---- ---------- --------------
default 0
WanFastlink