Concept Guide

web-server profile
web-server profile
absolute-session-timeout <30-3600>
bypass-cp-landing-page
captive-portal-cert <name>
ciphers {high|low|medium}
exclude-http-security..
idp-cert <idp-cert>
mgmt-auth [certificate] [username/password]
no ...
session-timeout <session-timeout>
ssl-protocol [tlsvl | tlsvl.1 | tlsvl.2]
switch-cert <name>
web-https-port-443
web-max-clients <web-max-clients>
web-skype4b-listen-port {http <listen-port>}|{https <listen-port>}
Description
This command configures the controller’s web server.
Syntax
Parameter Description Range Default
absolute-session-timeout
<30-3600>
Specifies the absolute time after which the
WebUI session times out post a successful
authentication.
30-3600
seconds
0
(disable
d)
bypass-cp-landing-page
If disabled, the controller uses the new
redirection scheme also known as the landing
page by default including the meta tag. This
can reduce the CPU load on the controller. The
controller falls back to the old redirection
scheme if this parameter is enabled.
— disabled
captive-portal-cert
Specifies the name of the server certificate
associated with captive portal. Use the show
crypto-local pki ServerCert command to see
the server certificates installed in the
controller.
— default
ciphers
Configures the strength of the cipher suite:
l high: encryption keys larger than 128 bits
l low: 56 or 64 bit encryption keys
l medium: 128 bit encryption keys
NOTE: This command is not available in FIPS
software images because ciphers are pre-
configured only to acceptable values.
high, low,
medium
high
exclude-http-security
This parameter excludes security headers
from HTTP response.
— default
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide web-server profile | 2244