Concept Guide

Table Of Contents
tunnel-node-mtu
tunnel-node-mtu <mtu>
Description
This command configures the MTU of a tunneled node.
Syntax
Parameter Description
tnode-mtu
Value of the MTU for the tunneled nodes
Range: 1024 to 9216
Usage Guidelines
A Dell controller can operate as a Wi-Fi controller, terminating GRE tunnels from tunneled node switches. As a
Wi-Fi controller, the controller does not perform full Wi-Fi switching functions. Instead, it accepts traffic from
ports designated as tunneled node ports, packages this traffic inside a GRE tunnel, and forwards the traffic
back to a central controller for processing.
Example
The following command configures the MTU of a controller for tunneled nodes:
(host) (config) #tunnel-node-mtu 1030
Command History
The command was introduced in ArubaOS 6.2.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide tunnel-node-mtu | 2192