Concept Guide

Table Of Contents
traceroute
traceroute<ipaddr>
source
Description
Trace the route to the specified IP address.
Syntax
Parameter Description
<ipaddr>
The destination IP address.
source <ipaddr>
Sets the source IP address through which packets are sent for tracing route.
Usage Guidelines
Use this command to identify points of failure in your network.
Example
The following command traces the route to the device identified by the IP address 10.1.2.3.
(host) (config) #traceroute 10.1.2.3
Command History
Release Modification
ArubaOS 2.0 Command introduced
ArubaOS 6.3 Introduced source parameter.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system User, Enable, and Config modes on
local or master controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide traceroute | 2187