Concept Guide

show wms routers
show wms routers <mac>
Description
Show Learned Router Mac Information for WMS APs.
Syntax
Parameter Description
<mac>
MAC address of a probe that can see the router.
Usage Guidelines
This command displays the MAC addresses of devices that have been determined to be routers by the listed
APs. This output of this command will be blank if there is not any broadcast/multicast activity in an AP's
subnet.
Example
In the example below, a single WMS AP has learned MAC information for four different routers.
(host) #show wms routers
Router Mac 00:08:00:00:11:12 is Seen by APs
-------------------------------------------
AP-Name
-------
AP32
Router Mac 00:08:00:00:11:29 is Seen by APs
-------------------------------------------
AP-Name
-------
AP32
Router Mac 00:08:00:00:11:57 is Seen by APs
-------------------------------------------
AP-Name
-------
AP32
Router Mac 00:08:00:00:11:6e is Seen by APs
-------------------------------------------
AP-Name
-------
AP32
Command History
This command was introduced in ArubaOS 3.0
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show wms routers | 2146