Concept Guide

show upgrade status
show upgrade status[summary]
Description
The output of this command shows the status of controllers using the centralized upgrade feature.
Syntax
Parameter Description
summary
Display a summary of all local controllers using the centralized image upgrade,
including the numbers of controllers currently in each upgrade state.
Usage Guidelines
The centralized image upgrade feature allows the master controller to automatically upgrade its associated
local controllers by sending an image from an image server to one or more local controllers. The centralized
image upgrade feature can be configured on a master controller only, and supports up to 100 simultaneous
downloads.
Example
(host) #show upgrade status
All Controllers
---------------
IP Address Hostname Type Model Version Upgrade Status
---------- -------- ---- ----- ------- --------------
192.0.2.103 corp-203 master DellW-7240 6.3.1.0_39600 N/A
192.0.2.104 corp-204 standby DellW-7220 6.3.1.0_39600 Up-to-date
The output of this command includes the following information:
Parameter Description Range Default
protocol
Specify the protocol used to send the software
upgrade from the image server to the local controller.
l TFTP
l FTP
l SCP
- TFTP
Server IP
IP address of the image server. - -
Username
If the protocol parameter is set to FTP or SCP, this
parameter displays the user name that ArubaOS uses
to connect to the image server.
- -
Password
If the protocol parameter is set to FTP or SCP, this
parameter displays the password that ArubaOS will
use to connect to the image server.
- -
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show upgrade status | 1957