Concept Guide

show threshold-limits
show threshold-limits
controlpath-memory|fan-speed|no-of-aps|no-of-locals|total-tunnel-capacity|user-capacity
Description
This command shows current values of the different resources monitored by the controller.
Syntax
Parameter Description
controlpath-memory
The output of this command displays the default memory threshold which,
when exceeded, will trigger an alert, the current configured threshold, the total
memory (in MB) and the currently available memory (in MB).
fan-speed
The output of this command displays the fan alert threshold. This parameter is
only available for controllers with fans, such as the W-7200 Series.
no-of-aps
The output of this command displays the following values:
l The default threshold for the number of APs, which, when exceeded, will
trigger an alert
l The current configured threshold.
l The maximum number of APs supported by the controller,
l The number of available licenses for campus and remote APs,
l The total number of APs, and the current number of campus, remote and
virtual APs.
no-of-locals
The output of this command displays the default threshold for the number of local
controllers which, when exceeded, will trigger an alert, and the current configured
threshold. The output also displays the maximum number of local controllers that
can be connected to this master controller, and the number of local controllers cur-
rently connected.
total-tunnel-capacity
The output of this command displays the default tunnel capacity threshold which,
when exceeded, will trigger an alert, as well as the current configured tunnel
threshold. The output also includes the maximum number of tunnels supported by
the controller, as well as the number of tunnels currently used by the controller.
user-capacity
The output of this command displays the default user capacity threshold which,
when exceeded, will trigger an alert, as well as the current configured user
threshold. The output also includes the maximum number of users supported by
the controller, as well as the number of users currently associated with the con-
troller.
Usage Guidelines
The controller will send a wlsxThresholdAbove SNMP trap and a syslog error message when the controller has
exceeded a set percentage of the total capacity for that resource. A wlsxThresholdBelow SNMP trap and error
message will be triggered if the resource usage drops below the threshold once again.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show threshold-limits | 1919