Concept Guide

ap provisioning-profile
ap provisioning-profile <profile>
ap-poe-power-optimization {disabled | enabled}
apdot1x-passwd
apdot1x-username
cellular_nw_preference 3g-only|4g-only|advanced|auto
clone
link-priority-cellular
link-priority-ethernet
master clear|{set <masterstr>}
no
pppoe-passwd
pppoe-service-name
pppoe-user
remote-ap
reprovision
uplink-vlan <uplink-vlan>
usb-dev
usb-dial
usb-init
usb-modeswitch -v <default_vendor> -p <default_product> -V <target_vendor> -P <target_
product> -M <message_content>
usb-passwd
usb-power-mode auto| enable|disable
usb-tty
usb-tty-control
usb-type
usb-user
Description
This command defines a provisioning profile for an AP or group of APs.
Syntax
Parameter Description Default Range
ap-poe-power-optimization
Enabling optimization minimizes the POE draw of the AP.
Enabling optimization may disable some parts of the AP.
Disabling ensures all features are enabled.
l enabled: AP operates in normal mode.
l disabled: USB and Ethernet port (eth1) are shut
down on AP.
disable
d
—
apdot1x-passwd
Password of the AP to authenticate to 802.1X using PEAP — —
apdot1x-username
Username of the AP to authenticate to 802.1X using
PEAP
— —
cellular_nw_preference
g-only|4g-only|
advanced|auto
The cellular network preference setting allows you to select
how the modem should operate.
l auto (default): In this mode, modem firmware will
auto —
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide ap provisioning-profile | 189