Concept Guide

Table Of Contents
aaa user fast-age
aaa user fast-age
Description
This command enables fast aging of user table entries.
Syntax
No parameters.
Usage Guidelines
When this feature is enabled, if a device comes up on the network with a different IP address, the device's old
IP address is immediately deleted. If the user fast-age feature is not configured, the controller retains up to two
IPv4 and two IPv6 addresses per device , and these IPs are aged out only when the device becomes inactive.
Command History
This command was introduced in ArubaOS 6.2.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide aaa user fast-age | 121