Concept Guide

Table Of Contents
show ap enet-link-profile
show ap enet-link-profile [<profile>]
Description
Show a list of all Ethernet Link profiles.
Usage Guidelines
Include a profile name to display details for the specified Ethernet Link Profile, or omit the <profile> parameter
to display a list of all Ethernet Link profiles.
Example
This command shows the speed of the Ethernet interface and the current duplex mode for the Ethernet Link
profile “default”:
(host) #show ap enet-link-profile default
AP Ethernet Link profile "default"
----------------------------------
Parameter Value
--------- -----
Speed auto
Duplex auto
The output of this command includes the following parameters:
Parameter Description
Speed The speed of the Ethernet interface. This value can be either 10 Mbps, 100
Mbps, 1000Mbps (1 Gbps), or auto (auto-negotiated).
Duplex The duplex mode of the AP’s Ethernet interface. This value can be either full,
half, or auto (auto-negotiated).
Related Commands
Command Description Mode
ap enet-link-profile
This command configures an AP Ethernet link
profile.
Config mode
Command History
Introduced in ArubaOS 3.0.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap enet-link-profile | 1159