Concept Guide

show ap debug ble-counters
show ap debug ble-counters {ap-name <ap-name>|ip-addr <ip-addr>|ip6-addr <ip6-addr>}
Description
This command displays the packet counters for BLE devices seen by the AP. In addition, the command displays
if any high power beacons are seen, the time at which configuration update was received for the beacons from
the BMC and the updated response sent back.
This command is supported in W-AP210 Series, W-AP220 Series (with external BLE USB), and W-AP320 Series.
Syntax
Parameter Description
ap-name
Displays the packet counters for BLE devices seen by the AP for a specific AP
based on the AP name.
ip-addr
Displays the packet counters for BLE devices seen by the AP for a specific AP
based on the IPv4 address.
ip6-addr
Displays the packet counters for BLE devices seen by the AP for a specific AP
based on the IPv6 address.
Example
The output of this command displays the packet counters for BLE devices seen by the AP. In addition, it
displays if any high power beacons are seen, the time at which configuration update was received for the
beacons from the BMC and the updated response sent back.
(host) #show ap debug ble-counters ap-name ap325
BLE Device Table
----------------
MAC Major# Minor# iBeacon ScanRspV0 ScanRspV1 HiPwr RSSI
--- ------ ------ ------- --------- --------- ----- ----
d0:39:72:d5:43:75 1000 1215 453 0 62 4 -71
c4:be:84:19:8b:a3 0 0 617 0 6 4 -81
c4:be:84:19:ec:67 0 0 604 0 1 4 -83
d0:39:72:d4:fa:9c 6 1 1 0 0 0 -89
c4:be:84:19:ef:99 1000 1374 126 0 0 0 --
78:a5:04:15:23:35 1000 1222 445 0 47 1 -70
c4:be:84:19:ec:2f 0 0 575 0 1 5 -84
LastUpdate CfgRx CfgTx
---------- ----- -----
4s NoUpdate NoUpdate
4s NoUpdate NoUpdate
4s NoUpdate NoUpdate
1292s NoUpdate NoUpdate
4s NoUpdate NoUpdate
4s NoUpdate NoUpdate
4s NoUpdate NoUpdate
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap debug ble-counters | 1057