Service Manual

Dell Networking W-Series Instant Access Point 6.2.1.0-3.4 | MIB Reference Guide Standard SNMP MIBs | 47
Chapter 5
Standard SNMP MIBs
This section provides information on the following standard MIBs modules and tables supported in this
release of Dell W-Instant.
 System MIB
 dot1qTpFdbTable
 ifTable
 ifXTable
System MIB
The system MIB contains system-specific information about the W-IAP. Dell W-Instant supports the
following system MIB objects:
 sysDescr— Provides information on the W-IAP model and software version of the W-IAP.
 sysObjectID—Identifies the network management subsystem. The sysObjectID in the standard SNMP
MIB can be used to retrieve OIDs for the Dell Networking W-Series Instant products. You can retrieve
information on all node devices in Aruba.my MIB by extracting the sysObjectId for each device. The
sysObjectID returns OIDs for a specific model number of the device within the Dell Networking W-
Series Instant product family.
For example, the iso.org.dod.internet.private.enterprise.aruba.products.apProducts.ap135
(1.3.6.1.4.1.14823.1.2.48) OID is returned for the W-AP135 device. For information on the OIDs
associated with the AP devices, see the apProducts tree in the Aruba.my MIB file.
 sysUpTime —Indicates the system up time since the W-IAP was initialized and actively connected to the
network.
 sysName — Indicates the name of the W-IAP.
 sysLocation— Indicates the physical location of the W-IAP. To retrieve information on the AP location,
the system location details for the W-IAP must be configured. For more information on configuring
system location details, see Dell Networking W-Series Instant 6.2.1.0-3.4 User Guide.
 sysServices—Indicates the services offered by the W-IAP.
The following system MIB objects are not supported:
 sysContact
 sysORLastChange
 sysORTable
sysDescr
Object ID 1.3.6.1.2.1.1.1
Syntax DisplayString
Max-Access read-only
Status mandatory